gasket

Use sealed gasket in the water path. There isn't stress on all link surface.

水道的连接应衬有密封垫片. 所有连接面都不应有应力.

The compound is widely to manufacture oil seals, gasket , roller and vibration rubber products.

该产品可广泛用于油封 、 衬垫、橡胶轧辊、防振橡胶等领域.

Lens Type: Lens gasket is shape, with metal production.

透镜式: 垫圈是透镜形状, 用金属制作.

Use new sealed gasket in the air path in order to prevent air leakage.

气道的连接应使用新的密封垫密封以防止气体的渗漏.

The gasket can be used for a wide temperature and pressure range.

适用于温度、压力变化范围较大的工况.

If you do not have a gasket, contact your supplier for a replacement.

如果你没有垫圈, 同你的供应商联系,要求一个替代品.

All interior surfaces exposed to piped liquid are stainless steel. Full stainless gasket surfaces.

所有与管道输送液体接触的内部表面都是不锈钢. 全不锈钢密封垫表面.

The main products are: Filter, filter, filter cover, gasket and so on.

主要生产产品有: 滤芯 、 滤清器 、 滤芯盖 、 密封垫等.

The loading of the outboard gasket has the rule of first rose then descended.

垫片外侧载荷变化呈先升后降的规律.

Specialize in all metal gasket assembly of domestic engine.

是国内发动机全金属气缸垫总成的专业生产厂家.

Accurate control of compression through close tolerance of gasket groove and allowance for radial expansion.

通过密封环槽和精确公差和径向膨胀的精确留量实现压缩的精确控制.

I. Features: PTFE gasket is manufactured by molding method with PTFE granular resin.

特征: 聚四氟乙烯垫片是选用悬浮聚合聚四氟乙烯树脂脂模塑加工制成.

This form of gasket has good performance of temperature, low leakage rate, high compression spring rate.

该形式的垫片具有耐温性能好 、 泄漏率低压缩回弹率高的特点.

When in place, the gasket will be seated and flush with the valve body ends.

放置好后, 垫圈将与阀体连接端口一起固定和冲洗.

Regular testing of gasket resiliency and inspection at Receiving due to sensitivity to inconsistent quality.

由于质量差异导致灵敏性差异,因此需要经常进行密封垫弹性测试和检查接受性.

Front panel sealed to IP 65 when used with clip mount and gasket provided.

前面板密封的IP65与使用剪辑提供安装和垫圈.

Moto parts major in Iveco fitting , C . V boot , flasher , Distributor cap, Gasket and so on.

汽配方面主要有白金 、 防尘套 、 闪光器 、 汽缸垫等.

From the upper oil cap and cap gasket the oil pressure in the tank tightly inside.

油泵的上部由油箱盖和油箱盖垫片,将油泵紧紧地压在油箱内.

Valves in these classes are also available with spiral wound gasket bonnet joints when specified.

如果用户要求,对于这些压力等级的阀门,我们也可以提供螺旋盘绕垫圈阀盖连接.

The single piece body design has no gasket joints which eliminates potential leak paths.

阀体的设计没有接口垫片,这就消除了潜在的渗漏通道.

Gasket won the second session of new IT products and BrandName Expo Gold Award.

密封垫片荣获第二届科技新产品和名优产品博览会金奖.