The microstructure of copper clad aluminum wire by drawing at room temperature is vimineous grain as fibril shape from prime equiaxed grain.

Microstructure and mechanical properties of copper clad aluminum wire by drawing at room temperature

铜包铝线材室温拉变形后的显微组织和力学性能

I decided to send a wire ordering a room with twin beds.

我决定拍电报预订一间有两张单人床的房间。

We have already studied the effect of magnetic field, wire space, the size of readout pad and the distance between the pad plane and the wire plane on the performance of TPC. At the same time some important results are given for designing TPC.

研究了磁场、读出电极几何尺寸、灵敏丝距以及读出电极平面与灵敏丝平面之间的距离等参数对TPC性能的影响，给出了TPC的一些最佳设计参数。

The results indicated that the tensile strength was reduced slowly after holding 500h, 800h and 1000h at 120 ℃ and 150 ℃, respectively, but its tensile strength was still higher than that of wire with the same size.

结果表明：GFRP棒材在120℃、150℃下分别保温500h、800h和1000h后，其抗拉强度虽有所下降，但仍高于或接近于同规格钢丝的抗拉强度；

This paper analyzes design targets and parameters of pad, pad hole, PC wire, shape, size and arrangement in automatic wavecrest soldering of PCB in detail.

本文对波峰自动焊接中印制板的焊盘、焊盘孔、印制导线及其形状、尺寸以及分布等设计指标和参数作了较详细的分析。

Wire the list size node to the totext node.

将list size节点连接到totext节点。

In the process of high speed wire-rod milling, micro-tension and automatic loop control are usually used, to assure the precision of wire sectional size, and to increase the productivity and the wire quality.

在高速线材生产中，大都采用微张力和自动活套控制，以保证轧材断面尺寸精度，提高生产效率和产品质量。

The elastic modulus of the surface layer does not change with a decreasing nanowire size whereas the elastic modules of core layer decrease with a decreasing wire size, leading to the fact that the overall elastic modulus of nanowires decreases as the diameter decreases.

结果表明，金属纳米线的弹性模量具有尺度效应，随着直径减小，整体弹性模量减小，主要是因为核心层弹性模量减小，表面层弹性模量变化不大。

The tensile strengths vary tremendously with wire size.

拉抗强度随簧丝尺度的不同而发生显著的变化。

Method: Bench and screen style simplified beds were fabricated using timber, steel screen, wire tack, etc.

方法：用木方、钢筛网、轴钉、铁钉、寸带等材料制成夹凳式和筛式两种简易床。

The materials and varieties of core wires of ultraviolet-curing wire saw have been selected by technical requirement of the wire saw work condition for material strength.

分析了线锯实际工作对材料强度性能的技术要求，确定了光固化线锯芯线的材料及种类。

Wire the send work item event between the custom step completion widget and the ECM step completion widget so that the custom widget can obtain the work item to render in its view mode.

在自定义步骤完成小部件和ECM步骤完成小部件之间连接发送工作项目事件，以便自定义小部件能够获取工作项目并在其视图模式中呈现。

Wire rolling of work wireless remote control computer management system

线材轧机工作状态无线遥测计算机管理系统

The utility model can greatly reduce the arc wire bending work amount and difficulty of rectification clinic, and improves the rectification therapy effect.

可以极大的减轻正畸临床的弓丝弯制工作量和弯制难度，提高正畸治疗的效果。

According to technical requirement of the wire saw work condition, the selection principles of material performances have been brought forward.

根据线锯加工工况对结合剂性能的技术要求，提出了光固化线锯树脂结合剂材料性能的选择原则。

The constitution, principle and application effects of the automatic control system are introduced briefly on regenerative heating furnace in the 4th wire work of Xingtai iron& steel company, combining with the automatic designing circs.

结合邢钢四高线蓄热式加热炉的自动化设计情况，简要介绍蓄热式加热炉自动化控制系统的组成、原理与应用效果。

Step 3: The Coil From the point that the wire bends, wrap it neatly around a skewer five times. You can then pull the skewer carefully from the loops. This forms the antenna.

从电线折角端开始缠绕竹签五圈，将竹签抽出即成简易天线

The paper gives introduction to realization of cartoon fabrication for wire rope to wrap on folding cylinder by advanced three-dimension cartoon simulation software.

介绍了利用先进的三维动画仿真软件实现钢丝绳在折线卷筒上缠绕过程的动画制作。

Fabrication of Simulation for Three-Dimension Motion for Wire Rope to Wrap on Folding Cylinder

钢丝绳在折线卷筒上缠绕过程的三维运动仿真制作

Occupying an entire downtown Chicago block, the tower is comprised of sufficient steel to build fifty thousand cars, has enough concrete to complete an eight-lane, eight-kilometer-long highway, and enough wire to wrap around the earth one and three quarters times.

大厦可以说占据了整个芝加哥市中心的街区，建构大厦的钢铁足以制造五万部汽车，混凝土足以建造一条八车道八公里长的公路，电线可以绕地球一又四分之三圈。