Study on the Tribological Properties of WC-Ni-Co-Mo-PbO High-Temperature Self-Lubricating Cermet Material

Research on Microwave Sintering Technology of Cermet Material

微波烧结金属陶瓷材料的工艺研究

The performance features of cermet material are comparatively analyzed. The cutting performances and application fields of some kinds of new cermet cutting tool materials including super fine cermet, coated cermet and super tough cermet are introduced.

分析比较了金属陶瓷材料的性能特点，介绍了超细微粒金属陶瓷、涂层金属陶瓷、超韧金属陶瓷等新型金属陶瓷刀具材料的切削性能及适用范围。

Tungsten carbide/ cobalt cermet coatings deposited by thermal spraying have been widely used in various areas to enhance the wear resistance of many types of engineering components.

热喷涂传统碳化钨/钴金属陶瓷作为耐磨涂层已得到广泛的应用。

In this paper, the recent developments of gradient cemented carbide and cermet are reviewed, with emphasis on their manufacturing processing, properties, and typical applications.

综述了国内外梯度硬质合金和金属陶瓷材料研究的进展情况，重点介绍了其粉末冶金制造方法、性能特征和典型应用开发。

New Development of Functionally Gradient Cemented Carbide and Cermet

功能梯度硬质合金和金属陶瓷材料研究的新进展

An Investigation on Critical Grit Size of Chromium Carbide Cermet Formed by SHS Using Microcomputer to Measure the Grit Size

碳化铬金属陶瓷临界磨粒尺寸效应的研究应用微机检测磨料粒度组成

Abrasive Wear Mechanism of SHS Coatings of Chromium Carbide Cermet

碳化铬SHS熔覆层的磨料磨损机理研究

The synthesis of butyl acetate with acetic acid and butanol as reactants and ammonium ceric sulfate as catalyst was studied. Through experiment, the influencing factors of reaction were investigated. The results showed that the esterification rate is over 93.4%.

研究了以硫酸铈铵为催化剂，乙酸和正丁醇为原料合成乙酸正丁酯，通过试验确定了最佳合成条件，结果表明，在适宜条件下其酯化率可达93.4%。

Catalytic Synthesis of Fructone-A and Fructone-B by Ammonium Ceric Sulfate

硫酸高铈铵催化合成苹果酯-A和苹果酯-B

The study of determination of molybdenum by reduction with diamine sulfate ane titration with ammonium ceric sulfate

用硫酸联氨还原、硫酸铈铵滴定钼的研究

The rate of reclamation of cerium is above 95% in the ceric hydroxide. The ratio of CeO_2/ TREO is about 83% in the ceric hydroxide.

用氨水回调，氢氧化铈沉淀中，铈的收率大于95%，CeO2／TREO约为83%。

The solubility of the precursor ceric hydroxide in nitric acid, recycle of crystal mother liquor of ammonium ceric hydroxide, and recovery method for cerium in mother liquor have been investigated.

讨论了前驱体氢氧化铈的硝酸溶解性能、硝酸铈铵结晶母液的循环利用、结晶母液中铈的回收方法。

A green method for ceric hydroxide synthesis with cerium carbonate and hydrogen peroxide as main raw materials is reported, and two products, ceric hydroxide and sodium acetate, are obtained.

研究了氢氧化铈合成的绿色方法.以碳酸铈和醋酸为主要原料，最后获得氢氧化铈和醋酸钠。

This paper has investigated the analysis of different valence states of cerium in ceric hydroxide by titration. Adsorption Characteristics of Arsenite and Arsenate on Hydrous Ceric Oxide

研究了滴定法分析氢氧化铈中铈的价态。稀土材料氢氧化铈吸附水中亚砷酸与砷酸阴离子的特性效果

The valence states of cerium in ceric hydroxide was determined by titration method, the results are satisfactory.

对氢氧化铈样品中铈的价态进行了分析，结果令人满意。

A New Method for Ceric Hydroxide Synthesis

氢氧化铈合成的新方法

Atomic economy of synthesis technology for high pure ceric hydroxide

合成高纯氢氧化铈的原子经济性

Green Chemistry Technology of Ammonium Ceric Nitrate Compare with Classical Technology

硝酸铈铵绿色化学工艺与传统工艺的对比

Study on Application and Synthesis for High Pure Ammonium Ceric Nitrate

高纯硝酸铈铵的合成与应用研究

The results showed that the Ammonium Ceric Nitrate used as initiator is high effective, the rate of polymerization reaction is satisfactory and the capacity of water-absorption for the resin is high.

结果表明：硝酸铈铵引发剂的引发效率高，聚合速度快，树脂的吸水能力强。