Explosion welding and properties of stainless steel carbon steel single and double side compound sheets

The Homogeneous Reactions of Cellulose EXPLOSION WELDING AND PHASE DIAGRAMS

纤维素的均相化学反应爆炸焊接与相图

It is pointed out that the conventional fabrication, when combined with explosion welding, will prove to be a new and important approach to the production of composite metallic materials in various shapes and sizes and with different properties and applications.

指出，爆炸焊接和传统的压力加工的联合，是生产各种形状、尺寸、性能和用途的金属复合材料的一条新的和重要的途径。

The experimental research on explosion welding through symmetric collision was conducted and new app-( lications) proposed.

介绍了对称碰撞爆炸焊接的实验方法，总结了它的实际应用。

The intensification is relative to technical parameters of explosion welding and base material ′ own intensification trend.

这种强化的程度与爆炸焊接工艺参数和基材本身的强化趋势有关；

Explosion welding and hot dual metal

爆炸焊接与热双金属

The joint transition zone measures about 1.5 times the single side in width and the decarbonized zone is nearly 1.5 times the single side, the cutting and explosion welding process is good for better edge welding of stainless steel carbon steel compound sheets;

双面复合界面的结合过渡区约为单面的1.5倍宽，脱碳区也接近单面的1.5倍.采用切割爆炸焊接法有利于改善不锈钢&低碳钢复合板的边缘焊合。

As surface exposed blasting explosion welding, however, like other blasting engineering, in the process of operation will produce shock waves, noise, vibration, toxic and harmful gases, individual flying rocks, impact explosion field surrounding environment.

然而作为地表裸露爆破的爆炸焊接，与其他爆破工程一样，在作业过程中会产生爆炸冲击波、爆破噪声、爆破振动、有毒有害气体、个别飞石等，对爆炸场周边环境造成影响。

If no trade term is specifically agreed, the delivery shall be Ex works ( EXW).

如果没有特别指明贸易术语，交货条件应采用工厂交货。

These are EXW ex factory prices.

以上是EXW工厂交货价格。

Explosion welding ( EXW) is one of the joining methods consisting of a solid state welding process in which controlled explosive detonation on the surface of a metal.

爆炸焊接是一种通过在金属表面施加可控的爆炸能量以实现金属连接的固态焊接方法。

The form which should fill the Price terms should not be EXW, but FOB or CIF only.

表格中应填的价格条款的地方，不能填工厂交货，只能填FOB或者CIF。

If there is no specific delivery clause in the contract, the delivery object will be deemed to be delivered" ex works"( EXW).

如果在合同中没有规定特殊的交货条款，商品交货将默认为工厂交货。

Specify EXW and whether prices for inland transportation and price of incidental services, must be quoted in addition to EXW.

规定报出厂价以及说明是否在出厂价之外还要报内陆运输费和伴随服务费。

This paper introduces the production technology of acetamidine hydrochloride and hydrogen chloride produced in BTC synthesis.

介绍了利用BTC生产 过程中产生的副产品氯化氢气体合成盐酸乙脒的工艺研究.

Hydrogen chloride burner that designed by mixing cross flow and multi orifice plate were introduced.

介绍了利用横喷射流与多孔板混合模型,选用合适的理论模型设计氯化氢灯头装置.

During the preparation the products and hydrogen chloride were continuously discharged with full reflux of acetone.

在制备过程中,丙酮全回流并连续地排出产品和氯化氢.

Teflon-lined hoses should not be used for hydrogen chloride, especially liquid, to avoid static charge-induced failure.

特氟纶作衬里的软管不能用于氯化氢, 尤其是氯化氢液体, 以避免静电导致的故障.

Piping used to supply hydrogen chloride into any liquid system must include backflow prevention.

用于给任何液体系统供应氯化氢的管道系统必须包含防止回流装置.

The fuming is a result of hydrogen chloride's reaction with moisture in the air.

冒烟是氯化氢同空气中的水蒸汽反应的结果.

The concentration hydrogen chloride could reach 31 %.

回收次品盐酸浓度达31%.