The server connection diagram generated by our application appears as follows

Finally, the top-level connection diagram of all modules has been shown and passed the timing simulation.

最后给出所有模块的顶层连接图，并通过了整体的时序仿真验证。

The connection dimension of the valve is identical valve for convenient replacement . 2.

阀门的连接尺寸与原三通球阀相同,更换方便.

Annex all piping connected with the endAdapted to the same type of connection size.

的所有管路附件具有与端部连接型式相适应的同一连接尺寸.

Joint type of this valve is flange joint.

本阀连接方式为法兰连接.

Connection: flange, silk mouth, welding.

连接方式: 法兰 、 丝口 、 焊接.

Connection: flange, welding, silk I, on the folder.

连接方式: 法兰 、 焊接 、 丝口 、 对夹.

Instructions are same regardless of valve end connections.

不管阀门的端口连接方式是什么,操作说明都相同.

In addition, the chip and antenna connection can also affect the cost.

另外, 芯片和天线的连接方式也会影响其成本.

Connection Mode Link, where a connection between message source and destination is established prior to transmission.

一种连接式链路, 信息源和信息目的地之间的连接建立在传输之前.

Again, this is not used if we're in thread-per-connection mode.

注意, 如果我们在线程每连接模式下本函数并不使用.

Connection mode shall comply with requirements of Technical Specification.

连接方式必须符合技术规格书的要求。

For this big-end bearing, steel-backed lead or tin shell bearings are used.

对连杆大头轴承来说, 使用的是铅的钢背或锡的轴瓦式轴承.

A link frame is set up using D-H notation.

采用D-H方法建立起机器人连杆坐标系.

This device, which is represented in figure 17.3, consists of six links, a to f.

图17.3所示即为此种装置, 它由自a至f的六根连杆所组成.

In electronics, a small length of cable with suitable end connectors for use patch panel.

在电子技术中, 接线板上使用的两端带有配套插件的短电缆.

In length of cable with suitable end connectors for use in a panel.

接线板上使用的两端带有配套插件的短电缆.

In general, the term gateway refers to a link between two different systems.

一般讲, 网间连接装置(gateway)指的是两个不同的系统间的一种链接(link).

Objective: 1 . Researched and Developed stereo-directional fixation system for animal and spinal cord injured tube . 2.

目的: 1、开发小动物立体定向固定系统和适合制备小动物脊髓半侧损伤模型的打击管及连接装置.

Install the unit to the in-dash location, and the connection box under the navigator's seat, etc.

把主机安装到仪表板上.并把连接盒安装到副驾驶座的下面.

If the connection box has been out of shape, cracked and damaged. Please replace it.

如发现接线盒外壳有变形, 裂痕或损坏,应停止使用.