The Structure and Usage of the Cylinder Bore Gauge

Cylinder Bore and Stroke Optimization Design Using Genetic Algorithm

遗传算法在内燃机气缸直径和行程最优化设计中的应用

The split of the big end is sometimes at an angle, so that it is small enough to be withdrawn through the cylinder bore.

大头的裂口有时有一个角度，以便足够小通过气缸。

Forward Engineering Research on Cylinder Bore Deformation of Automotive Diesel Engines

正向工程中车用柴油机缸孔变形的研究

Combined Bore-and-Roll Machining Technique for Hydraulic Cylinder Bore Mechanical Fixed Tool Group for Cylinder Bore of Rotors

液压缸筒的镗滚压复合加工技术机夹镗铰挤刀具组加工转子柱塞孔

Optimization of Cylinder Bore Honing Platform Structure and Improvement of Cylindricity

缸孔平台结构的优化及圆柱度的改善

Measurement of Honing Cross Hatch Angle for Engine Cylinder Bore

发动机缸孔珩磨网纹角的测量

Pump speed in rpm determines the pumps output volume for any given combination of cylinder bore and piston stroke.

泵速转每分钟决定了任何气缸和活塞组合的排泵量。

Development of Ignition Coils for Natural Gas Engine with Large Cylinder Bore

大缸径天然气发动机点火线圈的开发

Simulation on Cylinder Bore Deformation of Automotive Diesel Engines Using Integral Contact Multi-Field Indirect Coupling Method

车用柴油机缸孔变形整体接触多场分步耦合模拟

Maintenance: Both cylinder bore and cylinder head valve guide tube can be repaired by resisting.

大修：缸孔可采用镶缸套形式重修，缸盖气阀导管也可采用镶套形式重修。

Analysis for Diesel Engine Cylinder Bore Cavitation and Influence Factors

柴油机缸套的穴蚀及其影响因素分析

The Effects of Radial Clearance Between Piston and Cylinder Bore on Piston Lubrication

内燃机活塞裙部配缸间隙对裙部润滑影响的研究

The process of rotator squeezed into the cylinder bore is simulated by ANSYS/ LS-DYNA.

用ANSYS/LS-DYNA软件模拟回转体挤进膛筒的过程。

Cylinder bore wear prediction of internal combustion engine

内燃机缸套磨损预测研究

Study on the technology of laser honing applied in machining the cylinder bore of engine

发动机气缸孔表面的激光珩磨技术研究

Analyses the formation reasons, common characteristics and influence factors of diesel engine cylinder bore cavitation.

分析了柴油机缸套穴蚀形成原因、特征及其影响因素。

A Study on Equipment of Intelligent Capacitance Measuring Wear of Cylinder Bore of Auto Engine

智能型电容式发动机缸套磨损测量仪的研究

Improvement of Scuffing of Cylinder Bore for 490 High Speed Diesel Engine

490型高速柴油机拉缸的改进研究

Investigation on Laser Heat Treatment of Cylinder Bore for High Speed Diesel Engines

高速柴油机气缸孔激光热处理的研究

The lower one prevents the oil splashed onto the cylinder bore from entering the combustion chamber, and is called an oil ring.

底下的一道防止机油飞溅到缸筒从而窜入燃烧室的环叫做油环。