Parametric modeling of the arc sound in GMAW for on-line quality monitoring

Identification of Weld Defects in GMAW Based on Arc Sensing

基于电弧传感的GMAW过程焊缝缺陷识别方法

Effect of waveform control parameters on GMAW welding characteristic

波控参数对GMAW焊接性能的影响

Analytical model for dynamic process of metal transfer in pulsed GMAW

脉冲GMAW熔滴过渡动态过程的解析模型

Development of GMAW Welding Wire Feeding Experimental Sample Device Directly Driven by Step motor

步进电机直接驱动的GMAW焊送丝实验样机研制

Dynamic model of liquid bridge profile in GMAW

短路过渡液桥形状动态模型的研究

Multivariate statistical process control for on line monitoring of short-circuiting GMAW

短路GMAW焊在线质量监测的多变量统计过程控制方法

Dynamic model of GMAW system with short circuiting transfer

GMAW短路过渡动态模型的建立

Development actuality and key technology of droplet control in GMAW

熔化极气体保护焊熔滴控制的发展现状及关键技术

Calculation of temperature field and modeling of welding quality for GMAW

GMAW温度场计算及其焊接质量的特征建模

Absorption of GMAW pulse arc to Nd: YAG laser power

GMAW脉冲电弧对Nd∶YAG激光能量的吸收

Simple Adaptive Control for GMAW System Based on Feedback Linearization

基于反馈线性化的GMAW系统简单自适应控制

Preliminary Analysis of Bead Defects Formation Mechanism in High-speed GMAW

高速GMAW焊接焊缝成形缺陷机理的初步分析

Deposit metal samples are prepared by GMAW shielded with different gases in copper mould with cooling.

采用不同配比的保护气体,在水冷铜模中堆焊焊缝金属,获得不同扩散氢含量的熔敷焊缝试棒.

Interdependence of parameters in the whole dynamic GMAW system with short circuit transfer was researched.

从全系统的角度研究了短路过渡GMAW系统动态过程参数的内在联系.

Gas metal arc welding ( GMAW ) is the main welding method in welding production.

熔化极气体保护焊 ( GMAW ) 是焊接生产中常用的焊接方法之一.

The characteristics and advantages of middleware has been analyzed and studied in the thesis, on the basis of J2EE system structure and remote monitoring, an integrated network monitoring system which can cross platforms and systems occurs.

文中分析研究了中间件的技术特点及优势，在J2EE体系结构和远程监控技术的基础上，提出了一种跨平台、跨系统、集成的网络监控系统的解决方案。

Development of DNC Monitoring Technology for Machine Tools

机床DNC网络监控技术的发展

The Realization of Monitoring System of Network on Linux

基于Linux的网络监控系统的实现

Network Monitoring and Auto Alarming System Based on SNMP and Serial Communication

基于SNMP及串口通信的网络监控与报警系统

In the thesis, I first analyzed the fundamental principle of telecontrol system, and then I researched the system structure and control method, and proposed a C/ S mode solution.

本文首先分析了远程网络监控系统的基本原理，在此基础上，深入研究了远程网络数字交流伺服控制系统的系统组成和控制方式，并提出了C／S模式解决方案；