Study the performance of subgrade infiltration, bearing capacity and resisting frost of base.

It is of important significance to study the ultimate bearing capacity of foundation in three-dimensional stress.

研究三向应力状态下条形地基极限承载力问题具有重要的理论和实际意义.

High quality metal steel frame, stronger bearing capacity.

优质金属钢架, 承重更强.

Thickened steel body for good of bearing capacity.

超厚钢结构机体,承受刀座力量方式固定动刀.

Conic roller bearing is used for desirable bearing capacity.

园锥滚柱轴承,承载力大.

Compared with the angular contact ball bearings, bearing capacity, low speed limit.

与角接触球轴承相比 、 承载能力大, 极限转速低.

Involute spindle spindle: ideal bearing capacity and easy assembling and dismantling.

渐开线花键芯轴: 理想承载、装拆易行.

Lining cracks will affect the bearing capacity and the safety of tunnels.

隧道衬砌开裂将影响隧道的承载能力和使用安全.

Ultimate limIt'state, which corresponds to the highest value of the load-bearing capacity.

承载力极限状态, 它相当于结构能够达到的最大承载能力.

Involute spline spindle: ideal bearing capacity and easy assembling and dismantling.

渐开线花键芯轴: 理想承载.装拆易行.

Problems are analyzed such as the subgrade bearing capacity, sedimentations and anti-float.

针对相关地基承载力及沉降、 抗 浮等问题作了分析与探讨.

Bearing capacity research of ACSR with unequal altitude support.

支座不等高拱形波纹钢屋盖承载力的研究.

Remove thrust bearings from rear main bearing carrier.

从后主轴承托架上拆下止推轴承.

Bearings: Low friction, superior rod diameter to bearing length ratio.

轴承: 低摩擦, 优于棒直径长度比关系.

Machinery self-lock and heavy load bearing plate type of chain lifting system. High safety performance guaranteed.

机械式自锁,重负荷承载板式链条举升系统,安全性能高.

And the hook bearing plate and tank plate located between the ordinary.

支座和吊钩与罐体钢板间一般设垫板.

The dead center , being a stationary bearing point, must be lubricated.

由于是固定的支承点, 死顶尖必须润滑.

This is the weight-bearing point of this article want to confer.

这都是本研究所欲探讨、思考与厘清之重点.

Welding materials are one of the major materials of bearing pressure equipment.

焊接材料是承压设备用主要材料之一.

Seamless experts in this way can be welded together, bearing pressure Yehao.

无缝管专家介绍这种方式可以焊接起来, 承压力也好.

Suggestion is also given on the structural design of bearing shell.

并为轴瓦的结构设计提出建议.