The starting system contains a cranking , or starting , motor and other accessories.

Some cranking motors also have a solenoid that operates the shift lever.

有些起动电机还有一线圈来带动操纵杆.

After a moment of cranking the motor finally kicked over.

用手柄摇了一阵后,马达终于发动起来了.

The cranking enrichment system provides extra fuel when a cold engine is being cranked.

起动加浓系统在冷发动机起动时供应额外的燃油.

The stream comes cranking into the village.

那条小溪弯弯曲曲地流入村内.

The river flows cranking into the village.

河流弯弯曲曲地流进村落.

By about six, they're cranking the music up loud again.

到6点左右，他们又把音乐声音开大了。

Smooth and finish the crankpin to roundness.

把曲柄销磨光并精加工到正圆.

The cap and rod have bearings which permit the crankpin to rotate freely within the rod.

轴瓦盖和连杆中有轴瓦,它允许连杆内的曲柄锁自由地转动.

That anonymity creates a phoney equality, which puts cranks and experts on the same footing.

这样的匿名造成一种把怪人和专家放在同样的地位的虚假的平等.

Vegetarians are no longer dismissed as cranks.

素食者不再被视为有怪癖的人。

Pry the crankshaft forward , position the dial indicator to zero.

向前撬曲轴, 定位针盘指示表到0.

I steam operating company, Moldova accessories, rod, crankshaft, gears, ball, forging tools.

我公司主要经营汽 、 摩配件 、 连杆 、 曲轴 、 齿轮 、 球头 、 工具等锻件.

The stiffness of crankshaft is measured and its characteristics are analyzed.

同时测量分析了不同角度上的曲轴刚度大小及其分布规律.

The irrational distribution of crankshaft counterbalance weight causes greater vibration.

曲轴平衡块质量分布不合理,会引起发动机振动大.

An inward stroke , especially a piston stroke moving away from the crankshaft.

蒸汽机或其他发动机的活塞离开曲轴运动时的冲程.

The method of crankshaft vibration damper property and reliability experiments are discussed.

就曲轴扭振减振器的性能和疲劳试验的测试方法作相关探讨.

Remove vibration damper bolt and washer from end of crankshaft.

从曲轴端拆下减震器螺栓和垫圈.

As the crankshaft rotates, the crankpin swings in a circle around the shaft.

随着曲轴的转动, 曲柄销绕主轴作圆周摆动.

In the engine, oil is supplied to crankshaft and camshaft journals rotating in their supporting bearings.

在发动机里, 机油被供应到旋转在其支承轴内的曲轴和凸轮轴轴颈上.

The motion of the rotor can be balanced completely with rotating counterweights attached to the crankshaft.

使用连接在曲轴上的转动平衡块,转子的运动就能完全平衡.