A new type of austenite hot working die steel added copper is presented in this paper.

The effect of chemical composition on mechanical properties of the austenite-bainite ( is other-tally quenched ) white iron was investigated.

研究了化学成分对奥贝白口铸铁力学性能的影响.

Effect of residual austenite on mechanical properties and abrasion resistance medium Mn white iron was investigated.

研究了残余奥氏体对中锰白口铸铁力学性能和抗磨性的影响.

The failure of grid plate made of casting austenite heat resistant steel was analyzed.

分析了铸造奥氏体耐热钢篦板失效原因.

Melting Residual Stress is the main factor Causing Stress erosion damage on Austenite Rustless Steel's Structures.

焊接残余应力是奥氏体不锈钢发生应力腐蚀破坏的重要因素.

AlN precipitation at the full austenite grain boundary would worsen the ductility of the steels.

在奥氏体单相区,由于氮化铝的析出导致钢种的塑性恶化.

A new way to fine steel structure has been developed. It is the austenite-ferrite-repeating deformation.

提出了细化金属组织的一种新方法,即奥氏体 — 铁素体区循环形变.

Other than austenite, copper element dissolution is found in material.

母材区除了奥氏体组织外, 存在铜元素的扩散.

Furthermore, precipitate of Nb in deformed austenite is more helpful for DEFT.

Nb对变形奥氏体再结晶的显著抑制作用十分有利于DIFT,同时, Nb的碳氮化物析出对DIFT是十分有益的.

The material quality is ASTM A 743 M ( ZG 00 Cr 13 Ni 4 Mo ) the austenite stainless steel.

材质均为ASTMA743M ( ZG00Cr13Ni4Mo ) 奥氏体不锈钢. 由于其一,它们的形状所致,在加工制造中给工件的装夹和翻身带来很大的难度.

The interface of austenite and martensite is somewhat straight.

奥氏体和马氏体之间的界面为较平直的界面.

The induced martensite firstly nucleated in parent austenite intergranular and twin boundary.

应力诱发的马氏体首先在原奥氏体的晶界和孪晶界形核.

There occours needle-type or M-type martensite precipitation within retained austenite.

残余奥氏体内有针状或“M”型马氏体析出.

A simplified model of isothermal austenite grain growth has been developed.

在分析现有描述奥氏体晶粒长大模型的基础上,提出一简化模型.

These lath martensite first nucleates in parent austenite intergranular and twin boundary.

应变诱发马氏体首先在原奥氏体晶界和孪晶界形核.

The surface reaction of water atomized 304 L austenitic stainless steel powder during sintering has been studied.

摘要研究了水雾化奥氏体不锈钢粉末在致密时的表面化学反应.

The technology for tightness improvement of the Ni austenitic cast iron cable head is studied.

分析了提高镍奥氏体铸铁电缆插头铸件致密性的工艺方案.

We shall conduct the clean water for the hydrostatic test of the austenitic steel pipe.

咱们将为奥氏体不锈钢管的水压实验引进清水.

This paper deals with various technics of Austenitic, and meanwhile indicates the principles of their formation.

讨论并研究了奥氏体氮碳共渗的各种工艺, 提出了其组织形成的机理.

Austenitic Stainless Steel is a Ni-Cr-Mo stainless steel in the AISI Type 316 category.

在AISI类别316范畴中,奥氏不锈钢是一种镍 - 铬 - 钼不锈钢.

Nitrogen alloyed austenitic steels showed excellent ballistic property, higher than that of martensite steel.

含氮奥氏体钢具有优良的抗弹性能, 并优于传统马氏体钢的抗弹性能.