The unidirectional short silicon carbide fibers reinforced-glass-ceramic matrix composite specimens were fabricated.

A trademark used for an abrasive of silicon carbide crystals.

(商标)由金刚砂晶体构成的研磨剂.

The bullet is made of Wolfram Carbide , strong and durable.

扩管头为碳化钨材质, 永不磨损.

Formation mechanism of sintering cemented carbide pockmarks is studied.

研究了硬质合金烧结麻面的形成机理.

This important carbide precipitates both inter and intragranularly.

这种重要的碳化物向晶体内和晶体间沉淀.

Cement concrete pavement diamond saw blade, carbide saw blades.

水泥混凝土路面的金刚石锯片, 硬质合金锯片.

A carbide former if there is sufficient Carbon in the steel also.

如果钢中有足够的碳则碳化物就形成了.

The results show that the hardness has relation to vanadium carbides boundary.

结果表明,熔合区的硬度与该处碳化物的析出数量有关.

In this paper, some aspects of turning die grade carbides with domesticPCD tools are studied experimentally.

本文对用国产复合金刚石刀具车削硬质合金材料作了一些试验研究.

This paper deals with the granular carbides formation from hot deformation in high chromiumsteel.

研究了高速纸机中具有闷头的空心铸钢辊结构的塑性极限和参数设计问题.

The results show that the structure of the surfacing layer was martensite, carbides and residual austenite.

试验结果表明:焊后的堆焊层组织为马氏体+碳化物+残余奥氏体.

Therein, both retained austenite decomposition and carbides precipitation were the key factors in the cryo-treating process.

其中残余奥氏体的分解和微细碳化物的析出是关键因素.

Its microstructure is fine pearlite and carbides.

金相组织是细珠光体和碳化物.

This paper deals with the granular carbides formation from hot deformation in high chromium cast steel.

本文探讨了热变形高铬铸钢中颗粒状碳化物的形成.

Refractory metal and cemented carbides: steel, metal steel, tungsten metal, crucible etc.

难溶金属及制品: 高速钢 、 耐热合金钢 、 高比重钨合金 、 钼坩埚等.

The effect of adding rare earth elements, metals, metal carbides into cemented carbide, are summarized.

本文综述了向硬质合金中加入稀土元素 、 金属和(金属)碳化物对硬质合金性能的影响.

Molybdenum. Forms hard carbides for tool steel and high-speed steel uses.

钼加入工具钢和 高速钢 中形成强碳化物.

The exceptional tool performance of sintered carbides results from their very high hardness and compressive strength.

硬质合金材料的出色之处来源于它们非常高的硬度和耐压强度.

The action of the residual carbides during the spheroidizing annealing was discussed.

讨论了残留碳化物在球化过程中的作用.

Meanwhile, alloying agents can form carbides, so the hardness of bead welding layer is increased.

同时又由于合金元素能形成碳化物, 因此提高了堆焊层的硬度.

Lieutenant Hearn fingered the magazine on his carbine.

候恩少尉用手摸了一下卡宾枪的弹盒.