The camshaft has a cam, on which there is a lob , or bump.

The ratio of the crankshaft to the revolutions of the camshaft is 2∶1.

曲轴的转速与凸轮轴的转速之比是2∶1.

The camshaft and crankshaft gears can be connected directly, or meshed.

凸轮轴和曲轴齿轮可能被直接连结, 或者相啮合.

Two TDC ( Top Dead Center ) sensors are mounted at the rear of the single camshaft.

两个上死点的传感器安装在凸轮轴的后面.

A formula of the camshaft rotating velocity is deduced while keeping constant metal removal rate.

推导出了保持磨除率基本恒定时,数控凸轮轴磨床磨削凸轮时凸轮轴转速变化的计算公式.

The manganate phosphating technology of camshaft is introduced.

介绍凸轮轴的磷化工艺.

The isothermal quenching process of the ductile iron camshaft was analyzed.

对球铁凸轮轴的等温淬火工艺进行了分析.

The front timing cover and and a finished camshaft with timing gear on the end.

前面的时间和范围,并完成与凸轮轴齿轮的时间就结束.

The influence of inoculant addition amount on the structure and properties of camshaft was investigated.

试验了孕育剂量对凸轮轴组织和性能的影响.

As camshaft rotates, the lobe, or high spot of the cam, pushes of the valve.

当凸轮轴旋转时, 凸轮凸起的或者高点的位置, 推动气门座.

The metal shaft, called the camshaft, typically has individual cams for each valve in the engine.

那金属轴叫凸轮轴, 在发动机里的每个气门一般有各自的凸轮.

This is called an overhead camshaft arrangement.

这被叫为顶置凸轮轴装置.

Some high-performance engines have two separate camshafts, one for each set of inlet and exhaust valves.

一些高性能发动机有两个单独的凸轮轴, 分别负责开关进气门和排气门.

Further engine modifications also include precision-machining the cylinder heads and fitting them with four special camshafts.

进一步的修改还包括发动机精密加工的气缸盖和装修有四个特别凸轮轴他们.

Certain engines with overhead camshafts have timing belts that have a limited life span.

顶制凸轮轴结构的汽车发动机都配备了正时皮带,并且这个皮带的生命周期是有限的.

Camshafts, Rockerarm, Rocker Shaft, General Casting Automotive Parts, Components and Spares.

采购产品凸轮轴, 摇臂,摇臂轴, 一般铸造汽车零件, 部件和零件.

Camus was born in France. Heimproved his power in Siberia.

卡秒出生在法国, 他在西伯利亚提升修炼自己的能力.

You are Aquarius Camus. You control the 11 th Palace and are one of the Strongest Saints.

你是水瓶座卡妙, 镇守圣域第11宫,是最强的圣斗士之一.

Camus argued that not absurdity but absurd outcome is important.

加缪觉得荒谬并不重要,重要的是荒谬的结果.

Camus shifted at my side until he was sitting and looking straight at me.

卡妙朝我这边移了移,直到他能坐定并直视我.

Why did Camus make this choice?

卡缪为什么作出如此选择?