Atomistic competition has prima facie approval.

Effect gas inlet pressure, geometrical de-sign and relative position of metal delivery tube, atomization gas, etc.

本文研究了雾化压力 、 导液管的几何形状和相对位置以及雾化介质等因素对雾化过程导液管末端气体射流与金属液流作用区压力特征的影响规律.

Take atomization generator and fix it with seal rings then press gently into the spray gun.

取出雾化发生器,加装好密封圈后轻轻压入喷雾枪主体.

The expressions were derived to describe the atomization efficiency a stabilized temperature platform furnace ( STPF ).

导出在稳温平台石墨炉内原子 化效率 的表示式.

Pre-alloyed powder is sprayed through water atomization method.

用水雾化制粉的方法来制取预合金粉末.

Electro-spray is a spray atomization improvement technique by using the electrostatic force.

静电喷雾技术应用于防疫消毒,具有经济、高效、低污染等特点.

Spherical tungsten powder produced by plasma atomization technique is described.

本文尝试了用等离子喷雾技术制取球形钨粉.

Improve carburetor function , Upgrade atomization function , Complete combustion, Increase power performance.

促进汽油预热效果,达到100%全燃烧, 保持引擎和汽缸室的清洁, 减少机油污染, 能延续引擎寿命,保持最佳动力.

Whole set of industrialization technology of producing metal powder by atomization.

提供低松装密度高强度雾化铜粉,高品质铜锡10粉及雾化制粉工业化生产技术.

Improve carburetor function, Upgrade atomization function , Fully burining, Increase power performance.

增加溶氧量、高燃点,加快汽油和空气的结合作用, 燃烧迅速,爆发动力加倍,使引擎运转更加顺畅.

Result: Vaporous atomization has a great antiinflammatory effect on swelling caused by.

目的: 考察利咽雾化液抗炎抑菌作用效果.

Theresults of experiment show that atomization cooling can achieve its aim.

实验结果表明,雾化制冷是可以达到目的的.

The content of impurities in water-is greater than that in gas-atomization.

气雾化粉末触媒氧等杂质含量远低于水雾化.

The pressure drop was the driving force of atomization by nozzle.

压降是喷嘴雾化的原动力.

This air improves the atomization of fuel coming fron the low-speed port .

这些空气改善了从 低速 出口喷出的燃料的雾化.

The atomization process is more sensitive to disturbance than vaporization.

雾化过程比汽化过程对扰动更为敏感.

Based on common CWS ( coal-water slurry ) atomizer and atomization mechanism, a multi-level swirl atomizer is proposed.

本文在参考常用水 煤浆 雾化喷嘴和雾化机理的基础上,设计出了 多级 旋流雾化喷嘴.

According to ultrasonic atomization mechanism and trial and error, the fluid dynamic ultrasonic nozzle is developed.

根据超声波雾化机理和经过反复试验, 研制了流体动力式超声波雾化喷嘴.

The tube is finally heated to a temperature of about 2700 ℃ to atomize the sample.

最后则把石墨管加热到2700℃左右,使样品原子化.

The nozzle with 4 swirl slots is propitious to atomize at low pressure for serous lime.

4槽旋流喷嘴最利于石灰浆液的低压雾化.

Small volume to atomize glass inside no medicine, fog melt to stop immediately.

小量喷雾杯内无药物, 雾化停止即可.