In order to reduce computational effort , piecemeal dimensionality reduction Newton method was used to solve model.

The use of shading and highlights suggest dimensionality, which gives these buttons affordance or clickability.

阴影和加亮将三维特征表现出来, 这些按钮便被赋予了启示,或者说它们是“可单击的”.

The data analysis system solves design problems of dimensionality's level and cubes.

解决了维度层次设计和立方体设计等技术难题.

This phenomenon is called dimensionality curse.

该现象被称为维数灾难(dimensionalitycurse),主要原因是存在数据重复.

Normally, the correlations employ certain dimensionless numbers from analyses such as dimensional analysis or analogy.

通常, 交互作用使用某些无维的数字从分析譬如尺寸分析或比喻.

And corresponding dimensionless production formula and engineering production formula are given.

并给出了相应的无量纲产量公式和工程产量公式.

The principle can be illustrated by a set of dimensionless points scattered on a plane.

这个原理可以用散在一组几何平面上的无量纲的点来说明.

The numerical procedure has been derived in dimensionless form.

数值程序是按无因次形式推导的.

Dimensionless quantities in physics are those that require no unit.

物理学中无量纲的量就是不需要单位的量.

There were significant correlations between the dimensionless apparent slip velocity, apparent solids holdup and slip factor.

滑移因子、截面平均颗粒浓度与无量纲滑移速度之间存在显著相关性.

The dimensionless variable is redefined, and new standard curve of production is derived.

利用产量与压力的关系,重新定义了无因次变量, 导出了新型产量的标准曲线.

A dimensionless structure topology factor is proposed to quantify the structure optimization efficiency.

所提出的无量纲结构构型因子实现了优化结构的结构效率量化评估.

NPS, followed by a dimensionless number, is the designation for nominal fitting size.

后带一无量纲数的NPS是管件公称尺寸的代号.

We measured the dimensions of the kitchen.

我们测量了厨房的大小。

The oil field itself has dimensions of roughly 12 km by 3 km.

油田面积约为12×3平方公里.

I don't think it would spoil the dimensions of the room.

我不认为它会破坏房间的大小。

What are the dimensions of this language laboratory?

这个语言实验室的容积是多少?

He enumerated a number of " dimensions " of pleasure and pain.

他列举了一些快乐和痛苦的 “ 范畴 ”.

No doubt the General exaggerated the dimensions of the thread.

将军无疑夸大了威胁的程度.

The dimensions or prestressing force and eccentricity require modification.

尺寸或预加力和偏心需要修改.

Mechanical dimensions will continue to be driven by equipment and processing needs.

机械尺寸将继续受设备与工艺要求的控制.