Note ensure that the printer does not make the pressure relief image flattening or deformation.

This paper studies its mechanism from stabilization, deformation and combined action.

本文从变形、受力和共同作用等方面研究其工作机理.

The calculated deformation is almost equal to the real situation by measurement.

经检测,计算变形量与实际情况基本一致.

Torsion deformation is the biggest effect factor on elastic limit equivalent stress.

扭转变形是对钢丝的弹性极限等效应力情况影响最大的因素.

The reason of deduces deformation martensite in the drawing process is analysed also.

并分析了拉拔时产生形变马氏体的原因.

a deformation of the spine

脊柱的畸变

Its characteristics include fast cutting , narrow and small deformation etc.

具有切割速度快, 割缝小等特点.

Works of art and design shape and deformation in the main realistic.

艺术设计作品的造型以写实和变形为主.

The most wear form is adhesive wear, arc erosion and plastic deformation.

粘着磨损 、 电弧侵蚀、塑性变形是其主要的磨损形式.

In this paper, the effect of room temperature deformation on boronization is investigated.

本文研究了室温形变对渗硼过程的影响.

After scientific bamboo mosaic from the high temperature and high pressure, high deformation difficult.

竹材经过科学的高温高压拼接而成, 超高不易变形.

Without loss of generality, shear deformations will be neglected.

不失一般性, 忽略不计剪切变形.

Wave propagation in piezoelectric cylindrical laminated shells under large deformations was studied.

研究了考虑转动惯量和大变形效应的复合材料压电层合壳内的波传播规律.

There are widespread and rather strong intraplate deformations in Chinese continent.

中国大陆板内变形普遍比较强烈.

Initially, large deformations take place as a result of grain movements and readjustments.

最初, 由于颗粒的移动和调整而使多孔介质发生较大变形.

Appreciable differences may occur, however, when small deformations considerably alter the loading conditions.

当微量变形能使加载条件发生颇大改变时,就会产生颇大的差异.

We discuss in more detail the application of the coupledmode formalism to scalar waveguide deformations.

我们将详细讨论耦合模公式对标量波导畸变的应用.

Shape became magma: deformations and distortions, curves , elliptical, cellular, molecular shapes.

外形变患上恍惚: 变型和扭曲, 曲线,卵形, 蜂窝状的, 分子的外形.

Nuclear deformations confirm shell structure.

原子核形变证实壳层结构.

The process require high turing process and control of reldin g deformations.

对制作工艺及焊接变形控制要求较高.

If this were not true it would imply that the given bar deformations were not compatible.

如果不对,说明所给的杆变形是不协调的.