The polypepticle chains in elastin are present in a random arrangement.

An assay of desmosine ( DES ) in elastin hydrolysate was performed by HPLC.

用 高效液相色谱 技术对弹性蛋白水解液中锁链素进行了测定.

Skin cells should receive a stimulus that causes them to keep making both collagen and elastin.

皮肤细胞应该得到刺激,导致他们保持这使得胶原蛋白和弹性蛋白.

Skin should contain elastin as well as collagen.

应包含皮肤弹性,以及胶原蛋白.

Aloe hydrate factor and elastin extract, persistently hydrate skin and effectively smoothen fine lines.

芦荟保湿成份及弹力蛋白精华, 长效保湿的同时,有效抚平细纹.

Lines and wrinkles seem to evaporate, replaced by plump, vibrant skin alive with collagen and elastin.

岁月痕迹和皱纹像蒸发般无影无踪, 取而代之的是其蕴含的胶原弹力蛋白使得肌肤细致、柔滑 、 充满活力.

But there are not many products in the market place that can really help enhancing Elastin.

但市面上并没有太多护肤品能提升弹性蛋白,令皮肤回复年轻紧致.

The influence of oil ambient viscosity on non-steady-state thermal elastohydrodynamic lubrication was analyzed.

分析了不同的环境粘度对 非 稳态热弹流润滑的影响.

Some of the quantities involved in elastohydrodynamic lubrication may be mentioned.

下面提供一些与弹性流体动力润滑有关的量.

Using numerical techniques, the thermal elastohydrodynamic lubrication ( EHL ) in line contact under reciprocating motion was investigated.

应用数值分析方法求解了线接触往复运动工况下的热弹性流体动力润滑特性.

A thermoplastic polyester elastomer designed for blow molding or processing techniques requiring high melt viscosity.

热塑性聚酯弹性体设计用于吹塑或处理技术要求高熔体粘度.

A low modulus high performance thermoplastic elastomer with food compliance specificity.

低模量高性能热塑性弹性体的食物遵守特异性.

So, PU elastomer has a wide application field.

因此, 聚氨酯弹性体的应用领域非常广泛.

CNBRP and PVC were mechanically blended and prepared as a thermoplastic elastomer.

采用羧基丁腈胶粉(CNBRP)与聚氯乙烯(PVC)高温机械共混,制备共混型热塑性弹性体.

This paper introduced the injection mold design of the Polyurethane elastomer.

介绍聚氨酯弹性体的注塑模具的设计.

The properties and applications for new veritietie were of thermoplastics elastomer are reviewed in this paper.

介绍了热塑性弹性体新品种的特性与用途.

Adopt elastomer polymer emulsion into cement mortar, can formation no continuous pore concrete.

采用高弹体聚合物乳液加入水泥浆体中, 可以生成无连通气孔混凝土.

A raw rubber for millable polyether polyurethane elastomer was prepared.

研制了一种新型的聚醚型聚氨酯生胶.

Thermoplastic elastomer of styrene system block copolymer ( SDS ) was developed rapidly for its excellent properties.

苯乙烯与二烯烃嵌段共聚物 ( SDS ) 类热塑性弹性体因性能优良而得到迅速发展.

In this paper, we adopt prepolymer method to synthesize casting PU elastomer.

本文采用预聚物法合成浇注型聚氨酯弹性体.

In this paper, thermoplastics polyurethane elastomer ( TPU ) modified and toughened polyoxymethylene ( POM ) are investigated with Brabender extrusion melt blending.

本文选用热塑性聚氨酯弹性体 ( TPU ),用Brabender熔融挤出共混的方法对聚甲醛 ( POM ) 的改性增韧进行了研究.