There is fluidity shady area inside pelvic cavity, be pelvic infection?

In General, the ink thicker, viscous inks for greater fluidity, the less.

一般情况下, 油墨越厚其粘性也越大,油墨的流动性就越小.

It has good fluidity, high luster, good disperse, and high filling level.

具有流动性好 、 光泽度高 、 分散均匀 、 填充量高等特点.

Increase as Party member fluidity, the difficulty Party group knits increased, administrative cost also rose.

随着党员流动性增大, 党组织的难度增加了, 管理成本也提高了.

Objective To study the relationship between band 3 protein and membrane fluidity.

目的研究带3蛋白与红细胞膜流动性的关系及其在病理状态下的改变.

They believe that fluidity increases as the water gets warmer.

他们认为水的流动性会随温度的升高而增加.

High carburized rate was attainedby using Al O fluidized bed furnace.

结果表明:适当控制氮气与丙烷的比例可以获得良好的渗层组织及很高的表面硬度;刚玉流动粒子炉渗碳能够获得较高的渗碳速度.

At present, fluidized bed and shaft kiln are recognized as reduction equipment.

当前最受重视的还原设备是竖炉和流化床.

This approach does account for all the reported experimental findings in fluidized beds.

此近似法可说明流化床所有实验结果.

Both gas and liquid fluidized beds are considered to be dense-phase fluidized beds.

气体和液体流化床都可以认为是密相流化床.

Vibrating plays very apparent role in drying water-material and cooling fluidized operation.

振动对于含水物料的干燥与冷却流态化操作,有着十分明显的作用.

Slugging is especially serious in long , narrow fluidized beds.

在细而高的流化床中,腾涌现象特别严重.

A method for polymerizing olefins in a fluidized-bed reactor is provided.

本发明提供了用于在流化床反应器中聚合烯烃的方法.

Studies the dynamic behavior of the cold circulating fluidized bed for desulfurization.

研究循环流化床的冷态动力学特性.

In aerated flow, solids are fluidized or suspended by the gas.

在充气流动中, 固体颗粒被气体流化或悬浮起来.

Coal is heated to successively higher temperatures in fluidized beds.

煤在流化床中逐层加热到更高的温度.

The fluidized bed has both desirable and undesirable characteristics.

流化床的特性,既有有利的一面又有不利的方面.

Fluidizing transportation is a commonly used technique in vacuum transportation unloading system of bulk cement.

流态化输送是目前散装水泥气力输送卸料普遍采用的技术.

Angle of the alumina air-slide and quality of fluidizing elements.

氧化铝输送气动管道的坡度和物料流态化原理.

Aim : To analyze the factors affecting the fluidizing lipoid.

分析了影响流化磷脂流变特性的因素.

A mathematical model for computing FCC catalyst fluidizing regeneration process is presented.

介绍了一种用于计算催化裂化催化剂流化再生反应过程的数学模型.