Cement Caiwa machine. Hydraulic Pump Station. Hydraulic cylinder. Cylinder. High-pressure pipeline . Hydraulic system package.

Pulverized coal ash is hydraulically filled on ground of Zishan.

紫山灰场粉煤灰作为一种冲填土,粒度细,似粉砂.

At other times, the hydraulically assisted steering on the bridge is used.

在其他时候, 使用船桥上的液压助力转向装置.

The steering clutch is tighten by pressured springs and separated hydraulically with oil-type , multi-powder-metal discs.

转向离合器湿 式 、 片、末冶金摩擦片、簧压紧、压分离.

ACTUATOR A mechanical device operated electrically, hydraulically, pneumatically or mechanically for transmitting motion between components.

由电, 液压, 气源或机械驱动的机械装置,用于传送部件之间的运动.

The machine is hydraulically driven and structure with steel welded plate. This structure has enough ridged.

本机床采用液压传动,机架为钢板焊接结构,有足够刚性和强度.

The block is then tested hydraulically to its full design test pressure on each stream separately.

通过水力学方法,塞子在每条水流上的完全设计测试压力被测试出来.

At the present time the transmission is very often done hydraulically or pneumatically.

现在的发射常常是通过液态或气态动力燃料来驱动的.

The riveting force is generated hydraulically or pneumatically, depending on the model.

根据型号的不同,铆接力输出分为液压和气压两种.

Hydraulically-powered work table feeds work piece at a constant speed , and result in optimize cutting performance.

液压驱动工作台送进工件,进给速度无级可调, 以保持最佳的切割性能.

Clutches and gearbox units are operated hydraulically.

离合器和变速箱单元靠液压运转.

The bypass line shall be hydraulically sized to accurately measure low flow.

旁路管线应该经过水力分析,能够精确测量低流量.

The vehicle is equipped with two hydraulically operated stabilisers are lowered in preparation for the firing.

车辆装备二个液压操作稳定器在准备发射时降下.

The choice of good parameter of water pollution model is a nodus in hydraulics.

水质模型的参数率定一直是水质预报的难点.

China outstripped Europe in its understanding of hydraulics, iron smelting and shipbuilding.

中国比欧洲更早掌握水力学 、 冶铁和造船技术.

These engines use hydraulics and electronics to optimise valve settings.

这些引擎采用液压和电子技术来优化阀门设置.

Spacecraft is a complex system that is combined with mechanics, hydraulics, electronics and thermal control.

空间飞行器是集机械 、 液压 、 电子、热控等于一体的复杂大系统.

Most of the examples consider all aspects of operation design kinetics, hydraulics and mass transfer.

大多数例子认为操作的各方面设计动力学, 水力学和群众转.

Pump hydraulics are preliminary, based on Reference Plant information. CTC data at detailed design.

泵水力学是初步的, 是根据参考(业绩)装置的信息(数据). 在详细设计,在详细设计时用户确认数据.

The hydraulic calculation of pressure tunnel is a hydraulics issue needed to be solved in design.

水工有压隧洞的压力计算是一个在设计中必须解决的水力学问题.

Strong background in heavy steel products manufacturing and hydraulics.

对重型钢件及液压产品的制造有丰富经验.