The pump inlet filter program kept clean so as not to exhaust slowed down.

The figure 85 and 90 M closes at the inlet of the sill cock.

型号85和90M在洒水龙头的进口处关闭.

Install the column in the inlet.

在进样口装柱.

Impeller or both water inlet and outlet pipelines blocked up.

叶轮或进出水管路阻塞.

At the same time air is sucked into the inlet to replace the exhausted air.

同时,外面空气由进气口吸入代替被排出的空气.

Several inlet and outlet methods and specifications.

进出线口有多种方式及规格.

It is an industrial port on Swansea Bay inlet of the Bristol Channel . Population , 188 , 500.

是布里斯托尔海峡的小海湾斯旺西湾的一个工业港口.

Requirement: Air inlet must start to open when down stream pressure is 1.0 PSI or above.

要求: 当下游流体压力在1.0PSI及以上时,空气进口必须开始打开.

They went to a fishing village on a small inlet of the sea.

他们去了小海湾边的一个渔村.

Troffer inlet. Inlet can be set as hidden or not hidden. Inlet properties can be specified.

凹槽输入口. 可将输入口设置为隐藏或不隐藏. 可指定输入口属性.

Its better to put letters at the inlet and outlet.

最好在入口和出口处标上字母.

There is an inlet to a parking lot.

那儿有一个停车场的入口.

Verify inlet and outlet valve to 100 EX 153 are open.

确认进口阀和出口阀打开,连接到100EX153.

A high capacity valve with same inlet feature as standard valve, with thread on the outlet.

这种高性能阀门具有标准阀门相同的进口特性, 在出口端为外螺纹.

A light application of silicone grease to inlet of body bore is beneficial.

在阀体镗孔进口处稍微涂抹硅脂是有益的.

After working, close the gas bottle or inlet valve and adjust pressure valve to be relax.

工作结束后, 应关闭气瓶或管路进气阀门,逆时针旋转调节把手,使之旋到松弛状态.

Finished work every day, we must close the tank inlet valve.

每天工作完毕, 必须把水箱进水管阀门关闭.

Connecting stage. Inlets and outlets can be moved. Inlet and outlet quantities can be specified.

连接阶段. 可移动输入口和输出口.可指定输入口和输出口数量.

Thursday, the leading edge of an 80-kilometer long slick of benzene reached Harbin's municipal water inlets.

星期四, 长达80公里的被化学物质苯污染的水流开始进入哈尔滨市供水系统的取水河段.

Shaft vibration and bearing temperature increases at shifting steam turbine inlets mode in some turbine-generator sets.

部分大型汽轮机组在进汽方式切换时,高压缸轴承振动与瓦温存在爬升现象.

The swirl tube was characterized by double inlets and are cone.

该新型旋流管具有双进口、孤锥体的结构特征.