Reynolds experiment is an important experiment which shows the laminar flow and turbulent flow.

Testing and packaging in the final 10 Laminar flow under the hood.

最终检测和包装在10级层流罩下.

This paper reported the studied results on ing fucoidan from the kelp Laminaria japonica Aresch.

本文报道了福建地产海带提取岩藻聚糖的研究结果.

The transient response of delaminated composite laminate under low velocity is discussed in the present paper.

研究了含脱层损伤的复合材料层板在低速冲击下的瞬态响应问题.

The fracture mode changes from intergranular to a transgranular and shows a ductile laminate fracture mechanism.

断口还发现有“分层韧化”现象出现.

The effects of bend and torsion coupling of laminate by hinged support have been evaluated quantitatively.

定量地估计了横向剪切变形对四边铰支的正交异性板弯扭耦合效应的影响.

Third stage, pneumatic stop pushed rear edge to fold and laminate front edge.

第三段, 纸张后缘经后推气动挡板之作用,先折边再贴合完成,送入收纸台.

Laminate techniques and wood bending are taught, depending on the design needs of the class.

层压技术和木材弯曲技术的讲授, 将取决于班上学生设计的需要.

If more than one laminate is used, please attach additional copies.

若使用一种以上的基材, 请提供附加拷贝.

Ask parents to put up bulletin boards, laminate learning activities , sort papers, and on and on.

要求家长收拾宣传栏,参加各个学习小组, 把纸分类, 等等.

Polyvinyl fluoride used for laminate films may be clear or pigmented.

乙烯氟化物膜可以是透明的或有色的.

After the laminate attached by the time of stability. 3, Application: Apply to electronic products.

层压贴附后经时性稳定. 三 、 应用: 适用于电子产品方面.

The effect of hole diameter on bearing capacity of alloy plate and composite laminate was analyzed.

分析计算了中心开孔损伤对铝合金板和不同铺层方式的复合材料板承载能力的影响.

The copper clad laminate automation and realized by using Program Logic Controler ( PLC ).

简要阐述了用可编程控制器 ( PLC ) 实现对铜箔覆胶机自动控制的方法.

Modern windscreens are made from laminated glass.

现在的挡风玻璃都由夹层玻璃制成。

A bi-directional bending problem for antisymmetrically laminated angle-ply plate is studied.

研究反对称斜交叠层板的 双向 弯曲问题.

The photographs were mounted on laminated cards.

照片镶在压膜卡片上。

Per sheet of paper in a minutes apart, and then laminated together.

每张纸在一分钟之边分隔, 然后叠在一路.

Matrix crack is a frequent damage mode in a composite laminated panel.

基体裂纹是复合材料层板最常见的一种层内损伤形式.

I recommend real wood over laminated or simulated wood.

我推荐你选实木地板,而不是复合地板或仿木地板.

As for laminated or film-substrate systems, heterogeneous interface effect should be involved.

对于多层或者膜 - 基体系, 还可能涉及到异质界面的作用.