The academia has made great progress on the aspect of MCS in the field of pattern-recognition.

In this paper, we emphasize on multiplex switch sampling by MCS 51 and multi-chip communication.

本文主要分析单板的多路开关采样和 多芯片 通讯的实现方法.

Heavy rain resulting from MCS is the main factor results in flood.

由MCS引发 的暴雨是造成湖南山洪地质灾害的主要因素之一.

In view of the actual situation, choose MCS-51 series microcontroller as CNC control system.

针对实际情况, 选用MCS-51系列单片机作为数控控制系统.

The Protect Polymer MCS helps protect essential lipids, prevents moisture loss and restores colour treated hair.

仙姬造型产品的配方含高份子保护膜MCS, 防止头发脂质及水份流失,减少染发后色泽褪色.

Experimental results demonstrate that MCS outperform SCS in both identify ratio and reliability.

实验结果表明,MCS能显著提高系统的识别率和可信度.

Practical interface technique for MCS-51 microcontroller. Beijing: Beijing University of Aeronautics and Astronautics Press, 1999.

MCS-51系列单片机实用接口技术[M]. 北京: 北京航空航天大学出版社, 1999.

MCS-51 serial single chip interface technique [ M ]. Beijing: Beijing Aeronautics and Astronautics University Press, 2000.

MCS-51系列单片机实用接口技术 [ M ]. 北京: 北京航空航天大学出版社, 2000.

Intelligent Pressure Meter central component is used MCS-51 liquid crystal display and digital conversion integrated circuit.

智能压力巡测仪的中心部件是采用MCS-51与数字转换液晶显示的集成电路.

Based on the electric gun MCS 51 source code integrity of the source code has been tested.

基于电炮MCS51完整的源代码的源代码已经过测试.

MCU mounted on this board does not have the Calibration function.

安装于控制板上的MCU本身不具有确定坐标功能.

One method involves manually entering the actual tool dimensions into the MCU.

一种方法包括手工地插入实际刀具尺寸到MCU中.

Adopted MCU and PID control achieve precise and steady temperature.

同时采用MCU及PID控制,温度更精确,更稳定.

Knowledge of MCU and related C and assemble language programming.

熟悉MCU及相关的C语言和汇编的编程.

ST Microelectronics's Turbo μ PSD 3300 series MCU products.

意法半导体公司推出TurboμPSD3300系列MCU产品.

Experienced in Digital circuit design and MCU circuitry.

熟悉数字电子电路和MCU电路.

I 2 C bus structure of multi-MCU is described , which comes from sampling speed debate.

由采样速率的问题,引出多MCU的I2C总线结构.

The paper further establishes the hardware structures and software processes of MCU-based-alone operation wind generation system.

而且进一步研究建立了基于MCU的独立运行风力发电系统控制系统的硬件结构和软件流程.

The circuit has been applied and verified in a 8-bit MCU chip with CSMC 0.5μ m process.

这种电路已应用于一款8位通用MCU芯片中,在CSMC0.5μmCMOS工艺 上流片验证通过.

The system management software is programmed by application program of DSP and MCU language.

在软件设计方面,采用了结构化的编程技术,编写了各个MCU和管理主机的软件.

MCU and PID control keep temperature more precise and steady.

MCU及PID控制,温度更精确,更稳定.