The computer is packed in expanded polystyrene before being shipped.

...polystyrene cups.

聚苯乙烯茶杯

polystyrene cups

聚苯乙烯杯子

Reseach on making Adhesive by recycle of white garbage waste foamed polystyrene plastics.

利用“白色垃圾”──废PS泡沫塑料 改性制粘合剂的研究.

The product is made up of polystyrene, with high transparency.

本产品采用医用聚苯乙烯材料制成, 透明度高.

In this paper the recycle of polystyrene foamed plastic waste was studied.

本文对废旧聚苯乙烯泡沫塑料的再生利用进行了研究.

Polystyrene: Styrene offers excellent clarity and stiffness at an economical cost.

聚苯乙烯: 苯乙烯成本低,强度和透明度较好.

The high temperature ball valve seat material of choice for digital polystyrene or metal materials.

高温球阀的阀座材料可选用对位聚苯或金属材料.

Combustible: Generalgarbage , plant waste, plastics , rubbers , tires , dying and finishing industrial waste , plastic foam , polystyrene, resins , discarded engine oil.

适用行业: 民生废弃物染整业 、 工厂事业废弃物 、 代处理业 、 公有焚烧厂.

A stable polystyrene emulsion was obtained by the emulsification of waste polystyrene plastic foam.

通过对聚苯乙烯泡沫塑料进行乳化研究,获得了稳定的聚苯乙烯乳液.

The trend of the technological process of polystyrene resin synthesis were also discussed briefly.

概述了聚苯乙烯树脂制造工艺的发展趋势.

The sides are made from two sheets of aluminium with a polystyrene core for insulation.

房子的四壁是由两片铝板中间夹着聚苯乙烯的隔绝层制成的.

The interlayer may be assembled by polyurethane foam, polystyrene, glass rock wool, and PEF board.

夹层采用聚氨酯发泡 、 聚苯乙烯 、 玻璃岩棉 、 PEF板.

The engineering characteristics of expanded polystyrene ( EPS ) and its application in engineering are introduced in detail.

详细介绍聚苯乙烯泡沫塑料 ( EPS ) 的工程特性及其在工程中的应用.

Bring a mug to the office instead of using polystyrene cups.

带一个大杯子到办公室,不要用一次性塑料杯子.

The production process and formula of polysulfide sealant were introduced, the application progress is reviewed also.

本文阐述聚硫密封剂的配方组成、生产工艺及应用概况.

Adopted liquid polysulfide prepolymer cured at high temperature for sealing cap at the first time.

首次采用液体聚硫橡胶制成预聚体再高温硫化成型,压制新型聚硫橡胶密封帽制品.

O-nitrotoluene and sodium polysulfide were of first order . The ratio equations have been determined. respectively.

结果表明反应均为一级反应,并分别确定了反应的速率方程.

The recent production status of liquid polysulfide rubber at home and abroad was reviewed.

简述了国内外液态聚硫橡胶的生产现状,提出了端基转化法合成液态聚硫橡胶新工艺.

The mechanism of the reaction ofp-nitrotoluene with sodium polysulfide hasbeen studied with kinetic method.

用动力学方法研究对硝基甲苯与多硫化钠反应的机理.

Polytechnic or High school above, College is preferred.

中专或高中以上学历, 大专尤佳.