The prediction of the warp of plywood was carried out by finite element method.

This project uses bamboo or plywood, template surface is smooth, tight joints.

本工程采用竹胶板或胶合板, 模板表面光洁平整, 接缝严密.

Pack & Transport: After rust prevention, pack the parts into plywood or iron case for transportation.

对合格产品表面做防锈处理后装入胶合木板箱或铁皮箱后发运.

Especially, the strong joining capacity, flat and smooth nature and durability characterize the plywood products.

尤其是胶合板具有胶合力强 、 平整光滑、耐用等特点,已连续三年被列为“浙江省信得过产品”.

plywood furniture

胶合板家具

With steel, waste plastics, plywood, paper and other imports of a number of franchise rights.

具有钢材 、 废塑料 、 胶合板 、 废纸等多项专营进口权.

Plywood: Manufactured panel made up of three or more thin plies ( layers ) of wood.

胶合板: 用三层或多层的木材薄片胶结在一起制成的复合板材.

PMC type Partner manipulator , column design , with special equipment for picking, inclination and rotation of gears.

支柱式, 配备特殊设备以便抓取, 倾斜和旋转齿轮.

PMC Unwired Networks are transmitted, confirmed and serviced electronically.

PMC无线广播网是电波传输 、 确认和服务的.

In addition, optimum volume and distribution of PMMA cement are still not known.

另外, 聚甲基丙烯酸甲酯黏合剂的最佳剂量和分布目前也不清楚.

Be familiar with plastic and metal materials, know PMMA plus.

熟悉各种塑胶材料及金属, 尤其PMMA塑胶材料者优先.

That means PMMA has changed from polar polymer to non-polar polymer.

对此现象的解释机理提出了“孔洞”与“极性基团断裂”两种假设.

Method: Phacoemulsification with PMMA posterior chamber IOL implantation were performed on 64 eyes of 60 patients.

方法: 对60例、64眼白内障施行超声乳化术,植入PMMA后房型人工晶体.

An abrasion-resistant coating was prepared with organosiloxane on PMMA surface gel method.

其中,表面涂覆 耐磨 涂层是一种方便而有效的方法之一.

The optimization measures are given for the common defects of PMMA injection molding products.

并针对PMMA注塑制品常见缺陷提出了工艺优化措施.

Polymethylmethacrylate ( PMMA ) bone cement has been as a restorative meterial in bone restoration and hard tissue replacement.

聚甲基 丙烯酸甲酯 骨水泥作为骨修复材料在骨修复和硬组织置换中发挥着重要作用.

Efficient use of optical-grade PMMA lens, optical loss of small, good illumination.

采用光学级PMMA高效透镜, 光损小, 照度好.

These compounds showed good photochromic reactions both in solution and in PMMA amorphous film by photo-irradiation.

在光辐照下,这些化合物在溶液和PMMA膜中均具有良好的光致变色特性.

Objective : To study the mechanical properties of the PMMA denture-base enhanced by carbon fiber cloth.

目的: 研究碳纤维织布增强聚甲基丙烯酸甲酯(PMMA)基托的机械性能.

Along with the concentration of PMMA standard paniculate increased, apparent cutting rate increased a little.

随着PMMA标准微粒浓度的增加, 表观截留率略有增加.

AgCl particulates under 2μ m were uniformly dispersed in the PMMA.

氯化银微粒在聚甲基丙烯酸甲酯中均匀分散,形状规则,粒径大小均在2μm以下.