They cheered the rise of the hot-air balloon.

They crossed the English Channel in a hot-air balloon.

他们乘热气球横越英吉利海峡.

Hot air balloon that gradually clear up the broken fragments.

热气球上,那些支离破碎的片段渐渐清晰起来.

I'm too frightened to fly in a hot-air balloon.

我害怕乘坐热气球.

Jamie took off on a hot-air balloon trip around the world.

洁米搭乘热气球出发,准备环游世界.

I want to hop the Atlantic by a hot-air balloon.

我想乘坐热气球飞越大西洋.

I am frightened to fly a hot-air balloon.

我害怕乘坐热气球飞行.

Consisting of PVC tube, air-balloon, adjusting valve and stainless steel needle.

产品由PVC软管 、 气囊, 调节阀,不锈钢针组成.

NATO officials say a Russian-built helicopter crashed while taking off from Kandahar's main air base.

北大西洋公司官员说这架俄国造的飞机在坎大哈主空军机地起飞过程中堕毁.

Fill it bed to bed with bit, in order to Prevent air bladder appear.

嵌塞时注意用小块填料分层分段嵌实.防止出现空气泡.

Finally, the spraying experiment of HVAF air-blast atomizer designed was done and received a satisfied result.

最后对设计出的雾化喷嘴作喷雾试验,收到了良好的效果.

That air brake isn't the only active element of the Veyron's aerodynamics, either.

空气制动并非是唯一的活性元素的威龙的空气动力学果子吃.

A new model for mass transfer of air bubble in water is established.

建立了气泡传质的新的数学模型.

Automatic ending paper smoothing equipment, wipe out the wrinkling or air bubble after rewinding.

自动尾纸抚平装置, 消除复卷后的起皱或气泡之现象.确保复卷成品的平滑顺畅.

Furthermo re, the zinc evaporating and oxidizing cause air bubble, incomplete fusion and cr ack.

锌挥发和氧化会导致气孔 、 熔合及裂纹.

Can be combined with sticker, air bubble sheet, etc. Suitable for electronic component, instrument packaging.

可覆合,贴纸, 气泡纸等,适用于电子元件, 仪器包装使用.

The glazed surface not luminous, becomes rough, or has the air bubble is the quality question.

釉面不光亮 、 发涩 、 或有气泡都属质量问题.

Furthermo re, the zinc vaporating and oxydizing cause air bubble, incomplete fusion and cr ack.

锌挥发和氧化会导致气孔 、 未熔合及裂纹.

Each carton will be laid on air bubble for the completeness when shipping ( delivering ).

每箱包装都会铺上气泡纸,确保商品出货的完整性!

Includes solidified air bubble launcher and sphere ammunition!

包括凝固气泡发射器和球形弹药!

Too fast injection speed: burns flash , air bubble inside or melt jet.

注射速度太慢: 易出现流动痕,熔接痕,并且造成表面粗糙,无光泽.