What started as subjection by force soon became " voluntary servitude ".

At that time, as the reader will remember, it was penal servitude for life.

这就是说, 我们记得, 暂时处以终身苦役.

Printing oriention main drive with dual servo motor NC synchrodrive, positioning accuracy asas $ 0.01 mm.

印花导带主传动采用双伺服电机数控同步传动, 定位精度高达0.01毫米.

EDM servo system are analysed and studyed from the view of location accuracy in this paper.

从定位精度的观点对电火花加工伺服系统进行分析研究.

Hydraulic position servo system's composing, operation theory and practical realizing was illustrated. "

详细介绍了液压位置伺服系统的构成 、 工作原理和具体实现.

This driving wheel engages with that servo wheel and turns it.

这个传动轮与那个伺服轮相啮合,并使它转动.

servo-assisted brakes

伺服辅助制动器

An instrument for 3 D bullet marks identification based sensor of digital servo control was proposed.

本文介绍一种新研制的数字伺服聚焦式弹头发射痕迹非接触三维检测仪的原理、结构、控制以及实验结果.

Therefore, at present, the control strategy of PMSM servo system is a hot research.

因此, 目前对永磁同步电机伺服系统控制策略的研究是一个热点.

It is modified in order to provide an extra channel for the pitch servo.

那是改动,以降求分外的渠讲,让脚球场伺服.

CNC system imported from Taiwan and servo motor imported fro japa are adopted.

一、采用台湾进口电脑控制系统和日本进口伺服电机.

The servo system control is a key technology of the CD unit.

伺服系统控制技术是CD光驱的核心关键技术之一.

Decreased pressure fault of hydraulic servo system was diagnosed based on nonlinear observer.

利用非线性观测器对液压伺服系统失压故障进行诊断.

A servomechanism which follows changes in the input signal.

一种跟踪输入信号变化的伺服机制.

Fretting resistant & long-life servomotor bearings are utilised where precise motion control is vitally important.

抗磨损( 或 长寿命)伺服电机轴承通常用于对运行的精确控制有着至高要求的场所.

The 6 # generators hydraulic servomotor in Huangpu plant is prone to get stuck while operating.

针对黄埔发电厂6 # 机组高压调门油动机存在的卡涩现象,根据设备解体的具体情况,找出主要原因.

The drive system uses the servomotor, than other drive methods are more stabilized reliability.

驱动系统采用伺服电机, 比其他驱动方式更稳定可靠.

Which command signals other than electrical, the servomotor may be hydraulic or pneumatic.

控制信号不同于电信号, 伺服电机是液压的或者气压的.

Power on the Receiver, check if the four servos could work correctly.

接通接收机电源, 检查一下四个舵机是否均能正确的工作.

The servos are typically moving-coil actuators These actuators can be found in the laser pickup system.

伺服机构一般为动圈制动器,可以在激光拾取系统中找到它.

These ports may be used to control positioning servos or servos modified for continuous rotation.

这些口岸也许被使用控制安置伺服机或伺服机被修改为连续的自转.