Driving Mode: hand wheel, hand equipment, electromotion and pneumatic actuator.

Oxygen on-off valves consist of valve, actuator and accessories.

氧气开关阀由阀门 、 气动执行机构及附件组成.

Actuator output specifications often list beginning and ending torque values.

执行机构输出指标通常为开始和结束扭矩的参数值.

Simple bolt-on mount provides positive actuator support and alignment.

简易的螺栓安装方式,提供积极有效的执行机构支撑和对齐.

This design features low seating torque which reduces actuator size and cost.

这种结构的优点在于阀座扭矩低,所需执行机构小,因此也降低了成本.

This setup consists of a butterfly valve and a rotary electromechanical actuator.

这套装置由蝶阀和旋转电动驱动器组成.

Stepping motor was the main actuator of incremental motion control system.

步进电动机是增量运动控制的主流执行元件.

Actuator must be connected and operated exactly according to the operation instruction.

执行机构应按其使用说明正确接线与操作.

A new torque identification strategy of valve electric actuator is proposed.

提出一种新型阀门电动装置力矩辨识方法.

Performance of control system can be influenced by actuator.

执行机构对调节系统的性能有很大影响.

The developed electronic-actuator was used to realize its mechanization.

应用电子操动系统来实现其机械化工程,并给出了计算模型.

Wires run from the actuators to a power supply.

启动器电线接到电源上.

See Modulating Service Option for variable position actuators and applicable voltages.

请参阅调峰服务备选件章节了解可变位置执行器和可应用的电压.

Piezoelectric actuator is one of the most development prospects in MEMS actuators.

压电驱动是微机械系统(MEMS)微执行器最有发展前途的驱动方式之一.

Based on the modal control, modal sensors and modal actuators were designed.

基于模态控制方法, 设计了模态传感器和模态致动器.

The micro-actuators are fabricated by use of DRIE on SOI wafer.

本文中的微执行器采用深层反应离子刻蚀(DRIE)技术在硅隔离衬底(SOI)硅片上制作.

Universal actuator mounting accepts ISO, MSS or comparable square bolt-pattern actuators.

通用的执行机构安装方式,可适用于ISO, MSS或 类似方形螺栓模式的执行机构.

Position Indicating Switches are available for use on double-acting cylinder actuators.

位置指示开关可用在双作用气动或液动执行器上.

Manual or power actuators, please include details of requirements.

7.人工或动力执行机构:请包括所要求的技术细节.

Bevel gear actuators are recommended when pressure exceeds limits shown.

果压差超过所列的极限值,则建议采用锥齿轮执行器.

Universal actuator mounting plate accepts ISO, MSS or comparable square bolt-pattern actuators.

通用的执行机构安装面板方式,可适用于ISO, MSS或 类似方形螺栓模式的执行机构.