Scope: Sales thermosetting powder coating thermosetting powder coating.

The thermosetting plastic screw is a key part in the thermosetting plastical injector.

热固性塑料螺杆是热固性塑料注射机的关键部分之一.

Composite nitroamine propellant is composed of 70 % ~85 % nitroamine and 15 % ~30 % thermosetting binder.

研究了一种用70%-85%硝胺和15%-30%热固性粘结剂制成的复合硝胺推进剂.

The research and development of thermosetting resins and plastics in 2005 were reviewed.

综述了2005年我国热固性树脂及塑料的研究进展.

Molding process, equipment and die of thermosetting plastics for injection molding discussed in the paper.

的方法、工艺 、 设备和模具设计方面的问题.

The curing process of thermosetting resin matrix composite materials involves complex mechanical, thermal and chemical reactions.

树脂基复合材料的热固化成型是一个力 、 热与化学反应相互耦合的过程.

Curing agent for thermosetting powder coatings.

热固性粉末涂料固化剂.

When solar activity is high, solar extreme ultraviolet rays warm and expand the thermosphere.

当太阳活动剧烈时, 太阳极端的紫外线会加热并使热大气层扩张.

After the thermosphere is the thermopause, which is the outer most boundary of the thermosphere.

热成层之后是热成层顶, 它是热成层的最外边界.

The temperature rises rapidly to between 500 k and 2000 k in the region known as the thermosphere.

在称之为“热层”地区域内,温度很快上升到500K与2000K之间.

The paper briefly summarized the biotechnological significance and the researching advances of these high thermostable extremozymes.

主要讨论某些高热稳定性极端酶在生物工程中的重要意义及研究进展.

Has, the heat insulation, the lubrication function thermostable.

具有耐高温 、 绝热 、 润滑功能.

The inclusion complex was more thermostable than the mixture and the thermodecomposion was a one-order reaction.

包合物热稳定性比混合物好,热分解反应为一级反应.

The teflon compares with other plastics has thermostable, bears the chemical etching fine characteristic.

聚四氟乙烯与其它塑料相比具有耐高温 、 耐化学腐蚀优良的特点.

The titanium heating plate, has highly wear-resisting , bears the acid and alkali, thermostable, smooth non-fading characteristic.

发热板面采用钛金板, 具有高度 耐磨, 耐酸碱, 耐高温, 光滑不褪色特点.

Turn up the thermostat in your room.

打开你起居室的恒温器.

The thermostat is based on the fact that different metals have different coefficients of expansion.

恒温器是以不同的金属有不同的膨胀系数这一事实为根据的.

It is rather cold here, can you adjust the thermostat?

这儿太冷了, 你能调节一下恒温器 吗 ?

Element operation shall be controlled by a thermostat for each element.

每个加热元件的工作应该由一个温控器控制调节.

Element operation shall be controlled by an electronic thermostat.

加热元件的工作应该电子温控器控制调节.

Also the machine mold is up to the required temperature and is usually controlled by thermostat.

铸焊模具应达到所要求的温度而通常用恒温器控制.