The affection of the axial force is the focal point of the shearing resistance.

The axial force toward side board is always produced when the rope reaches the new layer.

钢丝绳向新的一层过渡时,对端侧板产生轴向推力,导致侧板弯曲,同时在侧板与筒壁过渡处产生较大应力.

Stability limit axial force.

安定极限轴向力.

Control sealing operation are axial force.

控制密封运行的力是轴向的.

Axial force balance by the balance disc.

轴向力由平衡盘平衡.

It can produce leaf-shaped axial compressor of 60 sets a year.

年产新叶型的轴流压缩机60台套.

Axial flow type and ballistic type. The speed of impeller depends on the speed of wind.

叶轮有两种:轴流式、冲击式. 叶轮受到大小不同的风力就有不同的转速.

And for the repair and modification, import or axial-flow turbocharger locomotives, power generation ships with supercharger.

并能为客户改装和修理进口增压器或轴流式机车 、 船舶发电用增压器.

For the low-concentration gas-liquid flow, the axial flow type cyclone has a good separation performance.

对于低含液浓度的气液两相流, 轴流式气液旋流器具有良好的分离性能.

Minisize axial flow blood pump is the focus on the structure study of artificial heart recently.

微型轴流式血泵是目前人工心脏结构研究的热点,外磁驱动是一种新型的血泵驱动方式.

In this paper, the flow model and basic equations in axial flow fixed-bed reactor are given.

本文提出了轴向流固定床反应器的流动模型和基本方程.

The effect of tip injection on the performance of an axial-flow compressor was performed numerically.

采用数值模拟方法研究了顶部喷气对某轴流压气机气动性能的影响.

State-of-the-art independent high-voltage switching power supply excitation technology and fast axial flow technology are used.

国际先进独立 高压开关 电源激励技术与轴向快速流动技术的完美结合.

The numerical calculation method is adopted to study the energy characteristics of axial-flow turbine.

采用数值计算方法研究轴流式水轮机的能量特性.

The paper analysis control requires of the axial flow compressor.

分析了轴流压缩机工况的控制要求和控制方案.

We analyzed in detail about axial strain temperature and transverse pressure sensitivity of polymer LPG.

详细讨论了聚合物长周期光纤光栅轴向应变、温度和横向压力响应.

Commonly, ultrasound elastography can only obtain the axial strain distribution of tissues with an external compression.

超声弹性成像通常只能得到组织在外部压缩作用下的纵向应变分布.

The axial strain increases and strength decreases as water content increases.

随着含水量增加,土样的塑性应变量增加,强度减小.

According to the movement direction, it falls into radial clearance and axial clearance.

根据移动方向, 可分为径向游隙和轴向游隙.

In ball bearings, as the radial clearance increases, the axial clearance increases as well.

在球轴承, 径向间隙的增加, 轴向游隙增长.

Friday, for Sandy Bay, adjust axial clearance.

换口环, 调整轴向间隙.