Don't cut unless the work-piece, cutting-tool and holding device have been fixed tightly.

This paper introduces the use and merit of MTHT spring buffer type cage security holding device.

介绍了MTHT型弹簧缓冲式罐笼安全承接装置的用途及优点.

The whole system mainly consists of eccentric cam holding device , hydraulicunit and computer on-slice control system.

其整个系统主要由偏心轮夹紧机构、液压泵站和单片机控制系统组成.

The influences of foaming and holding time on bubble diameter devitrifiedglass have been studied.

介绍了梯温炉的结构及原理,根据测量结果绘制了发泡温度与泡径的关系曲线.

Annealing: Heating to 750～780℃ , Holding time 1～3 h, Colding in furnace.

退火: 加热至750～850℃, 在此温度停留1～3小时,在炉中冷却.

Annealing: Heating to 800 ~850 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至800～850℃,在此温度停留1～3小时, 在炉中冷却.

Annealing: Heating to 830 ~880 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至830～880℃,在此温度停留1～3小时, 在炉中冷却.

Annealing: Heating to 780 ~850 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至780～850℃,在此温度停留1～3小时, 在炉中冷却.

Annealing: Heating to 830 ~860 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至830～860℃,在此温度停留1～3小时, 在炉中冷却.

Since the holding position to ensure that, when the proportion of overweight can be contained.

由于控股地位已确保, 增持比例当不会大.

The pencil should be hold tightly the holding position should be higher than drawing tools.

手握笔的位置要比用仪器绘图时高些,以利运笔和观察目标.

Hops also have mild preservative properties and add foam-holding capacity to the beer.

酒花还具有适度的防腐能力并能增加啤酒的泡沫保持能力.

Sinohydro Corporation Limited is conducting Dikgatlhong Dam with holding capacity of 0.4 billion Cube Metres.

迪克戈洪大坝项目由中国水电建设集团承建,蓄水能力为4亿立方米.

Patient; have holding capacity to pressure and setback.

有耐心, 对压力和挫折有承受力.

Multiple housing lengths give the option of adding additional dirt holding capacity.

多个过滤器长度给予选择加入额外的污垢控制能力.

And the transplanting matrices should have good permeability and certain water-holding capacity.

移栽基质应透气性良好,同时具有一定的保肥水能力.

Features: Sensitive gate trigger current and Low Holding current.

特点: 灵敏的控制级触发电流和很低的维持电流.

Double Sided Tape Feature: Excellent adhesion & holding power . Application Applide to general purpose on any surface.

双面胶带(图片仅供参考)产品介绍:双面胶带特性: 有着优异的粘接力,抗老化.

The hook covered with this adhesive has better holding power as compared with the market products.

所得产品与市场同类产品相比,具有较高的持粘力.

Aiming at one of the formability conditions, the saw tooth variable blank-holding force has been researched.

模拟中采用按一定规律变化的压边力作为成形条件之一.

Blank-holding force is an important technical parameter and a main control means in sheet forming process.

压边力的大小是板料成形中重要的工艺参数,也是板料成形过程的重要控制手段.