The curative effect of 325 cases has proved that the treatment of three arris needle with blood out for such diseases is superior to other therapies for it is efficacious, convenient and fit for spreading.

Fatigue specimens of the details were made in accordance with the patterns of the arris weld. The fatigue resistance curves and relevant statistical parameters are obtained through the analysis of the fatigue experiments and the FEM analysis.

通过疲劳试验研究和有限元分析，确定了该细节的疲劳抗力曲线和有关的统计参数，并建立了棱角焊缝构造细节疲劳破坏模型。

A novel microstrip slot antenna was presented here, which located on the arris of polyhedron and was fed by microstrip line inside the polyhedron.

本文提出了一种新型的、位于金属多面体棱上、由多面体内部微带线馈电的缝隙微带天线。

It has conoid fruit shape and five sticking out arris. Its fruit form index is 0.90-0.98. The average fruit mass is 210 g.

果实圆锥形，五棱突起，果形指数0.90～0.98，平均单果质量210g，果实全面浓红，色相片红；

The strokes of the characters of the vehicle license tag are convex and stiff, with very clear arris.

本车号牌的字符笔划凸出挺拔，棱角极为分明；

In this paper, the fatigue problem of beam joints of steel bridges is studied through examining the arris weld.

本文研究了钢桥钢梁中棱角焊缝构造细节的疲劳问题。

Fatigue specimens of the details were made in accordance with the patterns of the arris weld.

依据钢桥设计中所采用的钢梁棱角焊缝构造细节形式，模拟设计制备了该细节的疲劳试件。

An approach to inside arris defects of slight stretch reduced pipes micro-optics

钢管微张力减径内棱缺陷的探讨

Research on Quartz Wet Etching and Flatting Process of Sidewall Arris

石英湿法腐蚀及侧壁晶棱修平工艺研究

NC Processing of Three-Arris Aperture Based on Master CAM and UG

基于MASTER CAM和UG的三棱孔的数控加工

Care shall also be taken not to damage moulding and arris edges.

同时，应注意不要损坏模缘和斜边。

Research on date process method of automatic designing arris formed turning tool CAD systems

棱体成形车刀CAD自动设计数据处理的研究

Research on Density of Two Kinds of Particles with Sharp Arris Form

尖棱状两组分颗粒堆积密度的研究

Design and study on arris formed turning tool CAD system

棱体成形车刀CAD系统设计与研究

But saying that the arriver leaves all problems behind would be an error.

可是若要说成功者把一切难题都抛在了身后，那就大错特错了。

The aperiodic soft real-time system where tasks' arriver time and execution time are stochastic can be regarded as a stochastic service system.

任务到达和执行时间均是随机的非周期软实时系统可以看作是一个随机服务系统。

And I will punish the world for their evil, and the wicked for their iniquity; and I will cause the arrogancy of the proud to cease, and will lay low the haughtiness of the terrible.

我必因邪恶，刑罚世界，因罪孽，刑罚恶人。使骄傲人的狂妄止息，制伏强暴人的狂傲。

And they that led him, and had been a little before more mild, were changed to wrath for the words he had spoken, which they thought were uttered out of arrogancy.

方才和颜悦色劝说他的人，一听他说出这样的话，以为他疯了，遂改变为仇视的态度。

Pro8:13the fear of the Lord is to hate evil: pride, and arrogancy, and the evil way, and the froward mouth, do I hate.

箴8：13敬畏耶和华，在乎恨恶邪恶。那骄傲，狂妄，并恶道，以及乖谬的口，都为我所恨恶。

Close up the dart that is not required ( in this case the neck dart) by creasing the line from the shoulder to the bust point and then folding the creased line in the arrowed direction.

收拢不需要的省道，使肩到胸点这条线起皱痕，然后朝箭头标出的方向折这条痕迹线。

The getBalance message is an entry gate, because it is the arrowed line that is connected to the diagram's frame with the arrowhead connected to a lifeline.

因为是箭头的线连接到图的框架，而箭头连接到生命线，所以getBalance消息是一个入口门。