A Study of Relation Between Fractal Dimension and Frictional Angle of Joint Profile

Quality control and test of T-joint and angle welded joint in construction steel structure

建筑钢结构T型及角接焊接接头的质量控制与检测

The profile butt-welding is the most typical welding structure of ship welding, it includes the butt welding of outer plate, the butt welding of panel, the butt welding of web plate, the angle joint of outer plate and web plate.

型材对接焊是船舶焊接中最典型的焊接结构，包含了外板的对接焊缝、面板的对接焊缝、腹板的对接焊缝和腹板与外板的角接缝四条焊缝。

Based on this, the paper selects typical welding joint in the shipbuilding process, mainly including the butt welding of web plate, the butt welding of panel, the butt welding of plate, the angle joint of plate and web plate.

基于此本文选取船体建造过程中典型的焊接对接接头，该焊接接头主要由平板的对接、腹板的对接、面板的对接以及腹板和平板的角接组成。

It is presented that the differential pressure orifice flowmeter and the angle joint differential pressure measuring structure used in the test are the applied technologies of H2O2/ kerosene engine test.

提出了压差式孔板流量测量和角接式取压结构在过氧化氢/煤油发动机试验中的应用技术。

The machine is mainly used for extrusion and connection of 45 ° seam casement window with angle joint structure.

门窗单头组角机主要用于角码结构的平开门窗45°接缝的挤压联结。

The structural type of T-joint and angle joint in construction steel structure were expounded, the test characteristics of these structural type were explored, and the key point of control and test method for detecting flaw by supersonic was proposed in this paper.

本文论述建筑钢结构T型接头及角接接头的结构型式，探讨了这种结构型式的检测特点，提出了用超声波探伤的检测方法及控制要点。

The paper analyzes the causes for the formation of the problem and offers some countermeasures for its solution from the angle of comprehensive application of bank assets.

本文通过分析其形成原因，从银行资产运用多元化的角度就如何充分用好存差资金提出相关对策与建议。

The last chapter puts forward suggestions and countermeasures to improve the profitability of credit card business from the angle of the issuing bank and government.

第五章分别从发卡行和政府角度提出提高信用卡业务盈利能力、改善盈利状况的建议和对策。

The simulation algorithms of wave high, yaw force, rolling moment and sway moment were put forward. Meanwhile, it also discusses the influence of roll yaw on sideslip in spin, and of moving round plumb line on angle of bank.

给出了随机海浪波高、横荡力、横摇力矩、艏摇力矩的仿真算法。同时就尾旋中偏滚对尾旋侧滑的影响、绕铅垂轴旋转对坡度的影响等进行了讨论分析。

The seepage and erosion are primary dynamic influence factors on bank failure; and the soil composition, soil distribution and slope angle of bank are primary internal influence factors on bank failure.

指出了坡内的渗流作用与坡前水流的冲刷作用是岸坡发生崩塌的主要动力因素，而岸坡土体的物质组成和分布、岸坡坡度等则是岸坡发生崩塌的主要内在因素；

Meanwhile, it also discusses the influence of roll yaw on sideslip in spin, and of moving round plumb line on angle of bank.

同时就尾旋中偏滚对尾旋侧滑的影响、绕铅垂轴旋转对坡度的影响等进行了讨论分析。

Institutional barriers faced to Country Bank when it has been build are analyzed from three angle of bank access, bank operations and bank retirement.

本章从银行准入、银行运营和银行退出三个角度分析了县域银行创设后面临的制度障碍。

At the angle of bank management, it can be seen coming from the external factor and inside factor.

从银行管理的角度出发，更可将其认为来自银行外部因素和银行内部因素。

The Relationship between The National Government and Shanghai Bank Industry from the Angle of Bank Laws in The 1930s

从银行立法看30年代国民政府与沪银行业关系

Analysis of the computation method for measuring the angle of bank deflection at fixed point

定点测量倾斜偏角计算方法分析

Analysis and experiment on the taper angle of contact surface of bend rotation ultrasonic micromotors

弯曲旋转超声电机接触界面锥形角的分析与实验

The paper puts forward the concept of normal angle of winding bend for describing the degree of distortion and deformation of malformed winding bend.

为了描述畸形河湾扭曲变形的程度，提出了河湾法向角的概念。

We still make characters on the wall directly and deform the big characters through the angle of bend making by wall.

此项目我们依旧采用直接在墙面上做字，并且将大的字体借助墙面的转折角进行变形，使之成为字体的再设计。

Tube bending is a process by which a straight piece of tube is formed to a selected radius and angle of bend.

弯管工艺是指将平直的管子按选定的半径和弯曲角度弯曲成形。

The experimental results show that the total pressure loss and outlet derivation angle can be retained in an acceptable range when the bend angle of van rear end is less than a specific value, reaching the aim of adjusting the outlet angle of variable curvature cascade.

研究结果表明：叶片弯角小于一定值时，叶栅的总压损失和出口气流落后角保持在可接受的范围，能达到调节气流出口方向的目的；