The mechanical handling of the compression or injection molding of rigid plastic products of Burr.

The House ended up choosing Thomas Jefferson over Burr.

众议院最终选择了托马斯·杰斐逊而不是阿龙·伯尔.

Problems such as drill life exit burr and machined surface roughness etc.

对采用超声波振动钻削微小孔时钻头的寿命、出口毛刺和加工表面粗糙度等问题进行了研究.

Cut tube end square, ream, burr and size.

成直角切割管道端口, 铰除杂质, 去除毛刺,裁好尺寸.

Burr refers to the removal of bleeding edge, is the binding terms.

飞外指切除不入血外位, 乃装订术语.

An automatic radiusing machine was developed to eliminate the burr or edge fin of bar end.

为了清除棒材在生产过程中产生的端部毛刺、飞边等缺陷，研制开发了棒材自动倒角机。

And the basic foundation of prediction and control of metal cutting burr is established.

进而,为实现切削毛刺的预报与控制开辟了新途径.

The burr is one of the common phenomena occurring in metal cutting.

毛刺是金属切削加工中产生的常见现象.

Oh, and before I forget , contact Gregory Burr and arrange a meeting for tomorrow afternoon.

社:噢, 先交代你一声, 你和格雷戈里·柏尔联络一下,约他明天下午见面.

Burr was indicted for murder, but the charges were later dropped.

安伦波被控以谋杀罪, 但是这个指控最后被撤销了.

No burr, flash, scratch , flow mark, bright speck, shrinkage defects etc on the surface of product.

外观表面不可有毛边 、 刮痕 、 流痕 、 亮痕 、 缩水等不良现象.

Burr formation is an important factor of influence to metal cutting quality.

毛刺是影响金属切削加工质量的主要因素之一.

Cut tube end square . Ream, burr and size.

先沿着垂直方向切割管道, 并修整 、 去除毛刺,测量管径.

In third place was the Scottish burr, made famous by actor Sean Connery.

以“小舌音”为主要特点的苏格兰口音位列第三,这主要归功于男星肖恩康纳利.

No accessible sharp point , sharp edge or burr that pose potential hazard under normal use.

在使用过程中可接触的部位不允许有伤害人体的锐角 、 快口、毛刺.

She speaks with a soft rural burr.

她说话带着乡下人的轻柔的r音.

She speaks with a Scottish burr.

她讲话时带苏格兰人的颤音r音.

I take it you're a friend of the Kellings, Mr Burr.

伯尔先生，想必您是凯林家的朋友吧？

She speaks with a soft West Country burr.

她说话带有一种西部地区浓重r音的口音。

Truth cannot be burred.

真理难掩埋.

The firemen were called in to rescue the people trapped in the burring building.

消队员被请来营救围困在失火的楼房内的人们.