N experimental investigation was conducted for the air drag characteristics of a finned tube air cooler with 16 rows, 26 rows, and 32 rows respectively, and the results were compared with the calculating results of the calculating formulae of the common air drag of air coolers.

The purpose of this paper is to present one kind of a viable structural design of elliptical finned tube evaporative cooler, and to promote the application of the technology in the engineering fields, though the research between the existing theory and experimental data.

本文目的是通过对现有理论和试验数据的研究，提出了一种可行的椭圆翅片管蒸发冷却器结构设计，促进该技术在工程领域中的应用。

The elliptical finned tube evaporative cooler is an efficient and energy saving refrigeration equipment that gets cooling capacity from nature directly, no use of CFCs and no environmental pollution.

椭圆翅片管蒸发冷却器是一种直接从自然界获取冷量、不使用CFCs、无环境污染的高效节能的制冷装置。

Analysis of Simultaneous Heat and Mass Transfer during Drying of Porous Solid Heat and mass transfer of moist air on a finned air cooler and fin efficiency

含湿多孔生物材料干燥过程的传热传质分析湿空气在肋片表冷器上的传热传质及肋片效率

The content of the study can be summarized as below. 1. The finned radiation cooler was designed and explored.

主要内容包括：1、对翅片辐射降温器的设计方法进行了探索。

The strip shields also have the disadvantage of requiring regular cleaning. finned air cooler

片状冷却片也有缺点，就是需要定期清洗。带散热片的空气冷却器

The Reasons and Solving Measures for the Increased Resistance of the Horizontal Pipe Primary Cooler of the Chemical Products Workshop

化产车间横管初冷器阻力升高的原因及解决措施

Study of Heat Transfer about Heat Pipe Type Cooler of Semiconductor Refrigerating Element

半导体制冷的热管式散热器传热研究

Improvement on Liquid Spraying System of Horizontal Pipe Primary Cooler

横管初冷器液体喷洒系统的改进

New supporting equipment of primary air pipe in cooler for calculation

焙烧冷却机主风管的新型支撑装置

It was testified that CFD was a powerful tool to design and optimize the flow field in a cold store. Brief Talk on Heating Design of Using Waste Heat of Lateral Pipe Cooler Cooling Water

研究表明数值模拟在冷藏库流场优化设计中的应用切实可行而且优势显著。浅析横管冷却器冷却水余热采暖设计

Brief Talk on Heating Design of Using Waste Heat of Lateral Pipe Cooler Cooling Water

浅析横管冷却器冷却水余热采暖设计

Design and Check Calculation of Surface Air Cooler Based on Excel

基于Excel的水冷式表冷器设计和校核计算

Therefore, In allowing water resistance range, Parallel-flow heat exchanger can improve heat transfer efficiency and will be better choice for surface cooler in dry conditions through the reasonable multipaths designed.

因此，在允许水阻范围内，通过合理多流程设计，平行流换热器用于干工况作表冷器可以实现强化换热。

Based on the analysis of cooling capacity and water flow at load side ( surface cooler), provides control strategies for combined chillers with different number and other links.

根据对负荷侧（表冷器）冷量和流量特性的分析，给出不同冷水机组台数组合时的控制方案和其他环节的控制策略。

And the feasibility of Parallel-flow heat exchangers applied to the surface cooler were profoundly analyzed in dry conditions.

然后分析了平行流换热器用于干工况作表冷器的可行性。

Selecting Calculation of Three-port Modulating Valve in Cooling System With Surface Cooler

冷水表面冷却系统三通调节阀的选择计算

Temperature Control and Surface Cooler Reform in Operating Room Air Decontamination System

手术室净化系统中的温度控制及表冷器的改造

This paper introduces the steps and characteristics of surface cooler's check calculation with Excel table and program method. Excel table's advantages and practical values in heat exchanger's thermodynamic calculation is pointed out.

阐述了利用计算机程序与利用Excel电子表格进行表面式冷却器校核计算的步骤与特点，指出了Excel电子表格在换热设备热工计算中的优越性和应用价值。

The Necessity and Calculation of Discharge Gas Cooler of Cascade Unit Low Stage

复叠机组低温机排气冷却器的必要性及计算

For the problem we provide a structure and simple calculation method of discharge gas cooler.

本文就此项问题提出一种冷却器结构及计算方法。