Study of marine corrosion and antifouling behavior of copper alloys

The structure of the rust layer formed in marine corrosion of low alloy steel

低合金钢在海水中局部腐蚀锈层结构的研究

Several familiar forms of marine corrosion were generally introduced with its evaluation techniques.

概述金属材料常见的几种海洋腐蚀形态，并从技术层面介绍不同腐蚀形态的评价方法。

Study of Marine Corrosion of Low Alloy Steel with Electrochemical Impedance Spectroscopy

低合金钢实海腐蚀电化学阻抗谱研究阻抗传感器，阻抗换能器

Analysis of Marine Corrosion Resistance of the Metallic and Organic Coatings

金属和有机涂层的耐海水腐蚀性分析

Determination of corrosion preventive additive in engine oil by pyrolysis gas chromatography

透平油中防锈添加剂的裂解气相色谱测定

A Technique of Corrosion Preventive of Buried Pressure Steel Pipe for Sewage

浅谈埋地污水压力钢管防腐技术

Whole material of this practical new type uses corrosion preventive stainless steel.

本实用新型全部材料采用耐腐蚀不锈钢。

Finally, the construction process of the corrosion preventive project is presented.

最后介绍了该措施的施工过程。

And then the corrosion control and prevention were proposed.

进而提出了腐蚀控制与防范的措施。

A probe into structure corrosion control strategy in chemical environment

化工环境下的结构腐蚀控制策略初探

Study on the database of corrosion control design for aircraft structures

飞机结构腐蚀控制设计数据库研究

An Integrated System on Design and Evaluation of Maritime Corrosion Control

海洋腐蚀控制设计及评估综合系统

No corrosion allowance is required for such parts not in contact with the inside fluid as the outside surface of shell, skirt, support lugs and so on, except for anchor bolts.

对于不同内部介质接触的部件，如外表面、防护罩及支承凸缘等不需腐蚀余度，地脚螺栓除外。

Other parts add1/ 2 of the specified corrosion allowance on each side.

两个压力室的分隔部件，应对部件的的每侧提供一个腐蚀余度。

Consideration of Corrosion Allowance in Pressure Vessel Strength Calculation

压力容器强度计算中如何考虑腐蚀裕量

An Example of Determining Inspection Period by Calculating Corrosion Allowance

一个计算腐蚀裕量确定检验周期的实例

Reliability Design of Corrosion Allowance for Steel Pressure Vessel and Piping

钢制压力容器与管道腐蚀裕量的可靠性设计

The thesis mainly discussed the question, assumed conditions, models, objective function, constraints of single airport ground-holding model and single airport and air corridor ground-holding model.

论文主要研究了单机场地面等待模型和综合考虑机场和走廊口两部分空域的地面等待模型的问题提出，假设条件，模型建立，目标函数，约束方程等。

Instead, the zigzag shape was actually deliberately designed to give Britain an uninterrupted air corridor between Jordan and Iraq.

相反，锯齿形的边境线正是故意为英国设计，使约旦和沙特阿拉伯之间形成一条不间断的空中走廊。

Here air corridor built by pavement of European wood board becomes function transition joining up two spaces of upper and lower floors.

这里由欧木板铺装而成的空中走廊，是连接上下层空间的功能过渡。