Industrial capping machine [ for bottles, jars and other containers]

Design of single dielectric capping layer in dual metal-cladding microcavities

双金属镜微腔结构中单介质调谐层的设计

Due to the complexity of the behavior of pile capping beam widely used in the construction, the inverted continuous beam method is usually adopted in design methods to simplify the computation.

条形桩基承台梁在我国现代建筑工程中应用极为普遍，其设计计算大多采用倒置的连续梁模式进行简化计算。

This paper introduces the the design checking, process, construction methods and quality control of capping beam and embraces hoop method.

文章介绍了抱箍法盖梁施工的设计验算、工艺流程、施工方法及质量控制。

Design Features of Capping Beam for Pier of Straddle-type Monorail Track Beam Bridge

跨座式单轨轨道梁桥桥墩盖梁设计特点

The partial force analysis of gate pier hollow and shallow capping beam

门式桥墩空心薄壁盖梁局部受力分析

Strengthening Design of Capping Beam with Inadequate Carrying Capacity

承载力不足盖梁的加固设计

Analysis for the internal force of pile capping beam considering continuity of soil mass

考虑土体连续性的桩基承台梁内力分析

At the end capping stage, the reaction temperature is 120 ℃ at first and then 150 ℃, and the reaction time is 5 h. Under the optimum reaction conditions the yield of the product can be up to 86.7%.

在封端反应阶段，反应初期的适宜温度为120℃、后期以150℃为佳，适宜的反应时间为5h，在该条件下收率为86.7%。

The reaction temperature is 150 ℃ and the reaction time was 5h in the end capping reaction.

封端反应中，反应温度150℃，反应时间5h；

Use of end capping agent to increase the yield of thermostable acetal copolymer

利用封端剂提高共聚甲醛的热碱稳定产物收率的研究

Experimental study of MTA applied to direct pulp capping in dog

矿物三氧化物凝聚体用于犬牙直接盖髓的实验研究

Experimental study on the effect of chitosan on dental pulp capping

用甲壳胺直接盖髓的实验研究

Conclusions: The Nd: YAG laser seems to be a valuable aid in direct pulp capping.

结论：适当能量的Nd：YAG激光照射有助于直接盖髓术的成功。

Objective: To evaluate. the effect of Nd: YAG laser on direct pulp capping.

目的：观察研究脉冲Nd：YAG激光照射在直接盖髓术中的作用。

Pull off caps and unscrew fastening screws.

拉出盖板并拧开紧固螺钉。

The mud shale particles hydration is checked through altering their surface charge and compressing their diffused double layer with polyalcohol adsorbing.

多元醇吸附在泥页岩颗粒表面，改变其表面电荷，压缩扩散双电层，抑制泥页岩颗粒水化；

Finally, the effect of regulation work of landsliding was checked and potential slip surface scaned as well.

最后进行了滑坡整治工程效果验算和潜在滑动面的搜索。

Doppler dispersion estimation algorithms based on LTE is studied. The maximum Doppler shift estimation method through Doppler power spectrum is simulated by computer simulation. The algorithm performance is checked under Rayleigh and Rice channels.

以LTE系统为基础，深入研究高速移动场景下物理层多普勒频散估计算法，对通过计算机仿真检验基于多普勒功率谱的最大多普勒频偏估计方法在瑞利、莱斯信道下的性能。

The optimization preform shape checked by forward operation and the results show that the variation of effective strain trend to uniform, the forming force and the effective stress are decreased. 4 、 The study of multilayer metal die.

通过对优化结果进行检验，可以看出优化后的模型变形更加均匀，使得终锻模的等效应力和成形所需的动力均有所减小。4、多层金属热锻模的研究。

Through the experiments above, the initially designed agents dosing system and the clarifier in Xining's seventh water company were checked of their operation condition and equipments type, with our conclusions and recommendations.

通过上述试验，对西宁市第七水厂的初步设计文件中药剂投加系统、澄清池操作条件及设备选型进行校核，给出了建议和结论。