In this study, cement sand paste and common concrete with or without slag, fly ash and silica fume were used to investigate some accelerated curing on the strength and permeability of concrete.

Casting Process of Water-cooling Adamantine Clinker of Blast Furnace Manufacturing bricks by accelerated curing of steel slag cement

3270m~3高炉水冷钢砖的铸造生产工艺加速碳化养护钢渣混合水泥制备钢渣砖

Manufacturing bricks by accelerated curing of steel slag cement

加速碳化养护钢渣混合水泥制备钢渣砖

Study on the accelerated curing process of positive plates for VRLA battery

阀控式铅蓄电池的快速固化工艺的应用

The compressive strength also varied with the curing time.

养护时间不同，其抗压强度有明显的差异。

Take the average temperature in the curing time as curing temperature.

养护温度取各湿喷桩养护期的平均气温。

Experimental Study of Influencing Factors of Cement Curing Time

水泥候凝时间及其影响因素的试验研究

The optimize curing time under different temperatures was also investigated.

另外，对不同养护温度下土壤聚合反应的最佳养护时间也进行了研究。

Prediction on the available P_2O_5 in SSP curing period

过磷酸钙熟化过程中有效磷的预测

A method for automatic extending the tire curing period at a subnormal temperature was proposed.

介绍一种轮胎硫化欠温自动延时的办法。

The materials are water-soluble, low cost, easy construction, no pollution and short curing period.

该涂层为水溶性材料，具有造价低、施工方便、对环境无污染、养生时间短等特点。

Study of Initial Cracking Problems of Integrally-Cast Long and Large Concrete Structures During Curing Period

整体浇筑长大混凝土结构养护期间早期开裂问题探讨

The Numerical Simulating of the Temperature Fields in Massive Concrete Base During Curing Period

大体积混凝土基础养护期温度场数值模拟

Cube strength of concrete increase with the curing period showed a slight increase in late strength without significant attenuation. 2.

混凝土的立方体强度随着养护龄期的增长呈现小幅度增长，后期强度没有出现明显的衰减。

The density is found to be mainly affected by the EPS volumetric ratio while the effects of the curing period, the cement content and the type of lightweight material were negligible.

通过密度试验，明确了影响EPS颗粒混合轻质土密度的因素：密度主要受到EPS颗粒体积比的影响；龄期、水泥添加量、轻质填料种类对密度影响不大。

The manufacture process was improved from the first cold bonding-post curing to primary cure by using the mold having chevron cell, and the adhesion strength between the chevron type of pattern and the belt body was improved, and the conveyance capability was significantly increased.

制作工艺由起初的冷粘合二次硫化改进为在硫化机上加装人字花纹模具一次整体硫化，提高了花纹和带体间的粘合强度，明显地增加了输送带的输送量；

This paper studies the effect of the formulation of the cold curing epoxy copper powder electric conductive adhesive, curing temperature, curing velocity, using temperature pot life and storage life on the properties of the adhesive.

本文研究了冷固化环氧型铜粉导电胶的配比、固化温度、固化速度、使用温度、各种介质、适用期和贮存期对性能的影响。

The Origins and Resolutions of Some Usual Defects of the Cold Curing HR PU Foam

冷熟化高回弹聚氨酯泡沫制品常见缺陷及解决方法

Present situation and development trend of domestic and foreign high resilience cold curing PU foams plastics

国内外高回弹冷固化聚氨酯泡沫塑料发展现状与动态

The development and evaluation of F-Class quick curing high strength resin-rich fiberglass mica tape

F级快固化高强度环氧多胶玻璃粉云母带的研制及评定

A quick curing vertical foaming equipment for CFC& free Polyurethane flexible foam has been developed.

自行开发研制了无CFC聚氨酯软泡垂直发泡机械冷却快速熟化成套设备。