WMS ( Warehouse Management System) plays an important role in modern logistics system.

Warehouse Management System ( WMS) Based on Container Packing Mode

集装箱配载模式下的仓库管理系统

The welding residual stresses exist mainly within 15 mm from the brazing seam.

焊接残余应力主要分布在离钎缝15mm以内的区域。

Effect of alloy powder on Microstructure of brazing seam

钎缝中合金粉对组织的影响

X ray image analysis of high temperature brazing seam for corrugated plate sandwich structure

波纹板夹层结构高温钎焊焊缝X射线影像分析

Influence of microstructure of brazing seam on seam strength of contact

电触头钎缝组织形态对接头力学性能的影响

A new method to improve the heat resistance of the brazing seam

提高钎缝耐热性的新途径

Effects of Heat Treatment on Properties of Brazing Seam

热处理对硬钎焊焊缝性能的影响

The Al element in the substrate diffuses into the brazing seam, forming a thin reaction layer in the interface region.

焊接母材中的Al元素向焊缝发生了扩散，在界面区形成了一层很薄的反应层。

The mistaken operations possibly take place in ultrasonic C-scan testing of brazing quality, the difference between abnormal ultrasonic C-scan records and the right ones as well as their avoidance measures are described.

叙述超声波C扫描检验钎焊质量中可能出现的误操作，其所得的异常C扫描记录图与正确记录图间的差异及其避免方法。

Technology of Ultrasonic Brazing of Aluminum by Sn-Zn Solders and Strengthening Mechanism of Joint

Sn-Zn钎料超声钎焊铝合金工艺及接头强化机制研究

Quality evaluation of ultrasonic brazing of aluminum matrix composites

铝基复合材料超声波辅助钎焊质量评价

For both aluminum alloy and magnesium alloy, a sound joint can be obtained under appropriate welding conditions using the process method of ultrasonic brazing.

采用一定的钎料对铝合金、镁合金进行超声波钎焊能较好提高其接头力学性能。

Simulation of vibration amplitude distribution during ultrasonic brazing

超声波钎焊过程中振幅分布的数值模拟

By using this process, the wettability is obviously improved between the hard metal and the liquid state silver brazing flux and copper brazing flux.

采用这种方法可以明显改善硬质合金与液态银钎料和铜钎料的润湿性；

A new type of non-corrosive aluminum brazing flux

新型无腐蚀性铝钎剂

Research on the Properties of a New Kind of Middle temperatured Brazing Flux for Al

新型铝中温钎焊剂钎焊性能研究

Study of Chinese ancient brazing flux

中国古焊药研究

A new type of non-corrosive brazing flux has been studied.

研究并配制了新型无腐蚀性铝钎剂。

Melting point of brazing flux increased with Ni content.

但随着Ni元素含量的增加，其钎料的熔点也有所提高。

Brazing flux influence on processing properties of light beam brazing

钎剂成分对光束钎焊工艺性的影响