Studies on making better and draining effect for greenhouse soft shelled turtle pond

Objective: To investigate the difference of stereometric parameters of optic nerve head between normal subjects, patients with big cupped disk and primary open angle glaucoma ( POAG).

探讨正常人、大杯和原发性开角型青光眼（Primary open angle glaucoma，POAG）患者之间视乳头结构参数之间的差异。

After withdrawing the needle, 4 to 6 cupping glasses were used to at the Ah shih, retaining the cupping glass for 20 minutes.

出针后用玻璃火罐4～6个拔腰部阿是穴，留罐20min。

Methods: 90 cases were divided into two groups: 63 cases belong to general group and 27 cases belong to intractable group. Both were treated by electric-acupuncture, while the latter ones received further treatment of acupuncture Zusanli point, facial top exposure and cupping glass therapy.

方法：90例该病患者，按分型方法，一般型63例，顽固型27例，2组均采用电针治疗，而顽固型在常规电针基础上，加取足三里，面部配合TDP照射，火罐疗法。

Metals& Cupping testing method ( thickness 0.2~ 2mm)

GB/T4156-1984金属杯突试验方法（厚度0.2~2mm）

Then he improved the traditional "Cupping Method" into "Suction Cup Detoxification Method".

又从传统的“拔火罐”手法中，改进成为“吸盅排毒法”；

A case of pain along meridian caused from cupping method

拔罐引起循经疼痛病例报告

Acupuncture methods: in the local area, cupping method with treatment group.

针灸方法：电针，电针方法同治疗组。

Analyses the effect of frictional coefficient on the zinc-coated sheet process stamping forming by simulate results. ( 3) With combine the finite element simulation and the cupping test to reverse obtained the friction coefficient in process of zinc-coated sheet forming.

随后通过模拟结果分析了摩擦系数对镀锌板的冲压成形影响。（3）运用有限元模拟与杯突试验相结合的方法反求出镀锌板成形过程中的摩擦系数。

According to GB4156-84 《 The method of metal cupping test 》, develop the cupping grips that can be used in servo universal testing machine and computer control pressure testing machine.

根据GB4156-84《金属杯突试验方法》，研制在伺服万能试验机或微机控制压力试验机上应用的杯突试验夹具。

Paints and varnishes& Cupping test

GB/T9753-1988色漆和清漆杯突试验

The average value of cupping test is 87% of the base material.

拉伸性能超过母材，杯突值平均为母材的87%。

Application of New Fixtures for Cupping Test to Universal Testing Machine

新型杯突试验夹具在万能试验机上的应用

Cupping ( ductility) value Numerical study on the effect of multiple scattering on upward scattering coefficients and diffuse absorption coefficients of medium in water

多次散射对向上漫射散射系数及漫射吸收系数影响的数值研究

Cupping ( ductility) value Numerical simulation of cup drawing based on drawing-hole forming technology

基于拉深孔成形技术的杯形件拉深数值模拟

Using statistical backward elimination method, the mathematic model was established for the relativity between cupping test value ( IE) and mechanical properties of 9 kinds of steel sheet.

应用数理统计中后向消去法建立了九种板料杯突值IE与力学性能间的相关性数学模型。

The cupping ductility value is a key parameter to design traction process of mould.

模具拉伸系数是设计拉伸工艺的关键参数。

The following are the specific of research: ( 1) Analysis the impact of stamping velocity and lubrication conditions on the cupping value of zinc-coated sheet by cupping test.

具体研究工作如下。（1）通过对镀锌板进行杯突试验分析了冲压速度和润滑条件对镀锌板杯突值的影响。

Analyses the impact of stamping velocity and lubrication conditions on the friction coefficient and the relationship between friction coefficient and cupping value by simulate results.

根据模拟结果分析了冲压速度和润滑条件对摩擦系数的影响以及摩擦系数与镀锌板杯突值之间的相互影响关系。

The cupping value of lubricated aluminum alloy sheet is studied by BCS-30D general sheet metal test machine.

在BCS-30D通用板材成形性试验机上，对铝合金薄板的杯突值进行了不同润滑条件的试验研究。

Amsler cupping test forming machine for paper cups or containers

阿姆斯勒杯形拉延试验纸杯或纸容器成形机