The design and functions of the furnace front briquetting press in industry briquettes making

Study of Mold Cone Angle of Hydraulic Briquetting Press Based on ANSYS

基于ANSYS的生物质液压成型模具锥角优化

Experimental Studies on Chopping Cotton Stalk and Briquetting Process

C揉切机切碎。棉秆切碎及压缩成型的试验研究

Factors that have impact to biomass briquetting process;

影响生物质成型过程的影响因素；

Study of making formed coke with coal briquetting process

龙岩无烟煤冷压法炼制型焦的研究

Briquetting machine for mineral materials in powder or paste form

粉状或糊状矿物的压坯机

Design and analysis of cover switching mechanism for biomass ( straw) briquetting machine

生物质秸秆压块机盖体开合机构设计分析

Feeding Device Transformation of Briquetting Machine and Design Modification

成型机给料装置改造及设计改进

Analysis of the Factors Influencing Briquette Forming and Design of Roll Briquetting Machine

型煤成型影响因素分析及型煤成型机的设计

Design and simulation analysis of industrial coal briquetting machine CARBONIZATION OF BRIQUETTES

ML工业型煤成型机的设计及仿真分析

Study on Welding of Pressure Bar of Lead briquetting Machine

压铅机压杆补焊之研究

In applying hot briquetting for ISP dross processing, influences of pressure, temperature, time of pressing on strength of hot briquetes have been examined.

在用ISP法冶炼浮渣热压团时，研究了压团压力、温度、加压时间对铅锌密闭鼓风炉冶炼浮渣热压团块强度的影响。

In this study, the effects of hot briquetting process parameters on cold strength of the CCB, and the mechanism of the CCB high strength are investigated and discussed.

本研究重点考察了煤种及热压工艺参数对热压含碳球团冷态强度的影响，并探讨了热压含碳球团获得高强度的机理。

This paper analyses the process of coal hot briquetting and points out the way to improve squeeer.

对煤料的热压成型过程进行了分析，提出了改进挤压设备的途径。

The way how to improve the design of screw extruder used for hot briquetting process is introduced.

介绍了热压型焦工艺设备螺旋挤压机设计改进情况。

Study of the way to improve squeezer for hot briquetting process

煤料热压成型过程中挤压设备改进途径的探讨

Temperature Control in Coal Hot Briquetting Process with Gas Heat Carrier

气体热载体法热压型煤工艺的温度控制

The effect of additive amount of biomass and fat coal, briquetting pressure, coal sizes distribution, heating velocity of the carbonization process on the strength of formed coke were examined.

研究了生物质配入量、肥煤配入量、成型压力、煤料筛分组成、炭化加热速度对型焦抗压强度的影响。

How the fineness of powdered magnesia due to grinding, briquetting pressure and light roasting temperature affect the bulk density of sintered magnesia were investigated through tests.

考察了细磨程度、成形压力及轻烧温度对烧结镁砂密度的影响。

Improving body briquetting pressure could promote densification of nanometer-level aluminum nitride, but such influence gradually became weak with improvement of sintering temperature.

提高坯体成型压力可以促进纳米级氮化铝烧结致密化，但此影响伴随烧结温度的提高而逐渐微弱。

The effect of the Briquetting pressure and additional amount of diluting agent on the synthesis reaction and products behavior are investigated.

研究成形压力、稀释剂添加量等参数对反应过程及合成产物性能的影响；