ASME的例句大全

The design of noncircular section vessels is specified in ASME and GB 150.

非圆形截面容器设计,ASME和GB150中有明确的规定.

Marking and identification of Crane steel valves conforms to ASME B 16.34 and MSS-SP-25.

正确识别应用中的阀门非常重要,这有助于有关我们产品更换部件的订购和提出问题.

ASME Type 347 filler metal shall be used for welding Type 321 stainless steel material.

ASME347型填充金属用于321型不锈钢的焊接.

The asme lethargy, I am afraid, characterizes the use of our faculties and senses.

我担心同样的冷漠也存在于我们对自己所有官能和意识的使用上.

The results of ASME and experiment prove that the method above is valid.

对于有限元计算结果,通过ASME方法 和实验测试验证了有限元建模的正确性.

From this you can understand the importance of ASME Code in boiler and pressure vessel area.

从中领会ASME规范在锅炉及压力容器领域中的重要性.

Filler metals shall conform to the ASME Boiler and Pressure Vessel Code, Section II, Part C.

填充金属应符合ASME锅炉与压力容器规范第卷C篇的要求.

In this paper, PED was introduced briefly and compared with ASME code as well.

本文将对PED作一大体介绍,并与ASME规范作一系统对比.

Compared with ASME Code method of allowable flaw tables, this one has many advantages.

与ASME规范许可缺陷尺寸表法相比, 该方法更实用.

Deep research on contents about non-destructive examination in RCCM, ASME, HAF 003 standards and statutes, etc.

对RCCM 、 ASME 、 HAF003等标准和法规关于无损检测的内容有比较深入的研究.

Valves are available in both flanged and butt welding ends. All conform to ASME specifications.

这些阀门都可配置法兰连接端口和对焊连接端口, 都符合ASME标准.

ANSI was conversed into ASME standard and updated to the latest edition, which shows trans-century trends.

ANSI转化为ASME标准并更新为最新版本, 显示出 跨世纪 态势.

Tanks are designed to ASME specifications for the pressures and temperatures involved.

罐子根据相关的压力和温度按照asme规范设计.

Testing and acceptance criteria shall be in accordance with ASME Section IX.

试验和合格标准均应遵循ASME第IX卷.

Watts Model ETA Tanks are ASME fixed bladder type pre charged expansion tanks.

美国瓦茨型号ETA膨胀罐是符合ASME( 美国机械工程师协会)要求的固定内胆式预充气膨胀罐.

ASME Code Section I RULES FOR CONSTRUCTION OF POWER BOILERS 1998 Edition has been implemented.

ASME规范第卷《动力锅炉》已执行98版.

Base on ASME B31 formula, with a pressure determine ratio which is repair factor ERF to estimated the extent of metal loss features.

基于ASMEB31的公式，用压力判定比即估计维修因子ERF表示金属损失特征的严重程度。

We hold the ASME stamps U, S, A, PP, and R and our QC program is approved by most major end users.

我们获得美国机械工程师协会的认证。PP，R，QC程序都由主要的终端用户提供。