PTFE的例句大全

A method of machining to produce the big bore diameter PTFE sifter of the parts for high speed diazo printer was reported, by using polymer PTFE material.

报道了采用新型高分子材料聚四氟乙烯车削板为原料，机械加工生产高速晒图机的重要部件&大孔径聚四氟乙烯筛板的方法。

Commonly used bearing material has SiC ceramics, graphite, PTFE, such as filling.

常用的轴承材料有碳化硅陶瓷 、 石墨 、 填充聚四氟乙烯等.

Because of creep, rigidity and the axial displacement of PTFE expansion joint relate to the time.

由于蠕变现象的存在, 承载下的PTFE膨胀节的刚度和轴向位移都与时间有关.

Supplied with sampling pump and 2 meters of PTFE tubing.

全套装备包括取样泵和2米的管.

Diaphragm under different liquids were used NBR, chloroprene rubber, fluorine rubber, PTFE, poly ethylene 46.

隔膜泵根据不同液体介质分别采用丁晴橡胶 、 氯丁橡胶 、 氟橡胶 、 聚四氟乙烯 、 聚四六乙烯.

PVC construction with PTFE seat and FPM seals.

PVC结构,配置聚四氟乙烯阀座和FPM密封.

The company specializes in the production and sales of fluorescent lamp starters and PTFE tape.

本公司专心致力于日光灯启辉器和聚四氟乙烯生料带的生产和销售.

The tear strength and elongation of PTFE reduce when filler content increases.

随着填料添加量的增加,抗拉强度和伸长率降低.

Magnetic pump sliding bearing materials impregnated graphite, PTFE and engineering ceramics.

磁力泵滑动轴承的材料有浸渍石墨 、 填充聚四氟乙烯、工程瓷陶等.

The nano-sized PTFE particle generat metal fluoride, forms physical boundary film and repair the injured surface. Submicron-sized PTFE works as rolling element, micron-sized PTFE hinders relative motion of the friction surfaces due to the distortion from pressing.

纳米PTFE微粒通过生成金属氟化物、微粒修复作用和形成物理边界膜，亚微米PTFE通过滚动体作用。微米PTFE在摩擦副间发生变形而阻碍摩擦表面相对运动。

The wear resistant mechanism, molding technology and filler selection for PTFE modified by LCP are introduced.

介绍了液晶材料改性聚四氟乙烯的作用机理 、 成型工艺、配比选择、产品特点等.

Blends of poly ( phthalazinone ether sulfone ketone ) ( PPESK ) and polytetrafluoroethylene ( PTFE ) were prepared via solution frictiontester.

采用溶液共混法制备了不同质量比的新型含二氮杂萘酮结构聚芳醚砜酮 ( PPESK ) 与聚四氟乙烯 ( PTFE ) 共混物.

Basically, this compressor is not in the oil cylinder, the piston ring and packing usually PTFE.

这种压缩机气缸中基本上不含油, 其活塞环和填料一般为聚四氟乙烯.

EPDM or PTFE diaphragm selection affords wide range of applications, from corrosives to slurries and high-purity.

三元乙丙橡胶或聚四氟乙烯隔膜选项使得应用更加广泛, 从防腐,到泥浆和高纯度.

The main process: from specialty fibers woven, PTFE and silicone rubber to the coating.

主要工艺流程: 从特种纤维的织造, 到PTFE和硅橡胶的涂覆.

Shutter central conical closure PTFE that allows drain by the lower end.

关闭中央圆锥形的PTFE开闭器,能使水通过低端流尽.

This article discuss the cause and control about treeing of PTFE gold plating board.

文章简要探讨了聚四氟乙烯介质镀金板产生镀须现象的成因及其改善措施.