TGA的例句大全

TGA analysis revealed that β-estradiol could load into mesoporous silica nanoparticles via simple diffusion equilibrium.

TGA分析显示β-雌二醇通过简单的扩散平衡可以负载到介孔硅中。

TGA analysis showed that the cured product has a initial decomposition temperature and the end of temperature of 329.4 ℃, 417.5 ℃, which demonstrate that this new epoxy resin have good heat resistance.

用热重分析的方法分析了在此条件下固化产物的分解温度和终止温度分别为329.4℃和417.5℃，这表明所合成的新型环氧树脂具有良好的耐热性能。

The heat properties of the composite were studied by DMA and TGA. The results showed that when the content of CNTs was less than 1.0%, the glassy transition temperature of the composites lower than that of PMMA and the decomposition point had no evidently change;

DMA和TGA的研究表明，碳纳米管用量少于10%的复合物玻璃化温度降低，分解温度无显著变化。

The TGA measurements showed that the content of the grafted polymer can be adjusted by the ratio of the monomer and the chain transfer agent, so the polymerization process is controlled.

TGA测试表明接枝聚合物量可以通过单体与链转移剂之间的投料比来调控，这说明反应是可控的。

The combustion characteristics and dynamic behaviors of soot have been studied by using TGA and TPO.

利用TGA和TPO对碳烟进行燃烧特性和动力学分析.

The PUIs obtained were characterized by FTIR spectroscopy, UV Vis spectroscopy, DSC and TGA.

用红外光谱 、 紫外-可见光谱 、 DSC和TGA等手段对合成的PUI进行表征.

The thermogravimeric analysis ( TGA ) shows POSS has good thermal stability.

结构及TGA分析结果表明,所合成的POSS是一个含有不规整立体结构的混合物,在高温下具有较高的质量保持率.

The degradability of polymers was investigated by scanning electron microscopy ( SEM ) and thermo-gravimetric analysis ( TGA ) .

采用扫描 电子显微镜 和热重分析技术研究了聚合物的降解性能.

The structure and property of copolymer was analyzed and certified by TGA, FTIR and elemental analyzer.

用元素分析 、 红外光谱和热重分析的方法来验证和分析聚合体的结构和热性能.

Products Directorate ( TPD ) of Health Canada and TGA approval for use in Australia.

证照的治疗产品理事会 ( 技 ) 加拿大卫生部和TGA批准在澳大利亚.

Carbothermic reduction of zinc sulfide in the presence of lithium carbonate and calcium oxide analysis ( TGA ).

本文探讨 碳酸 锂与氧化钙存在下的硫化锌碳热还原反应.

Then the product have been characterized in purity, viscosity and char yield with IR, TGA.

采用红外光谱仪、热重分析仪 、 流变仪等分析了酚醛型氰酸酯树脂的纯度 、 残碳率及粘度特性.