Z-axis的例句大全

The + Z axis should be the " up " axis .

轴正方向作为 上方.

Using astigmatic method to extract information of light source in z axis.

用散光的方法来提取光源在Z轴上的位置。

Console: Console include 2 D, Z axis, marking the first air Surge filters.

1主机: 主机包括二维 、 Z轴 、 打标头、空气调压过滤器.

Z axis 10 section auto-refining processing function.

轴10段自动修细加工功能.

Pitch and Z axis separate control.

节距Z轴独立控制.

A new structural development of Z axis for a nano-CMM is described in this paper.

介绍了一种新型 纳米 三坐标测量机Z轴的结构设计.

Remedy: Check mechanics of the Z axis. Check by Service personnel; possibly exchange of head.

方法: 检查Z轴的机械部分, 通过服务人员的检查, 可能更换旋转头.

Assume z axis vertically downwards, and take ground as grid origin. Q ( z, t) is the water-bearing rate at t time in z under ground.

设z轴垂直向下，坐标原点取为地面，Q（z，f）为在t时刻离地面距离为z处的土壤含水率。

The image resolution in Z-axis and time axis is improved.

它提高了图像Z轴分辨力和时间分辨力。

Left-handedness is defined as any positive axis ( x , y , or z ) pointing away from the viewer.

而左手系就定义为任意轴的正向均背向观察者.

The important axis in CNC lathe is the Z and X axes.

数控车床中最重要的两个轴是Z轴和X轴.

Using 90 ° scattering geometry configuration x ( z+ △ y, xz) y, the angle between polarization direction of scattering light and x axis is denoted by δ.

应用90°散射几何配置x（z+Δy，xz）y，散射光的偏振方向与x轴成δ夹角。

In figures of the quadratic functions, the method of space alternate coordinate has been used. A special point has been selected as the origin and a representative vector has been selected as the Z axis of new coordinate system.

对于属于二次函数的图形，本仿真程序采用空间坐标变换的方法，选择特殊点作为新坐标系的原点，将有代表性的矢量作为新坐标系的Z轴。