abrasive的例句大全

The main wearing mechanisms of the tin bronze are fatigue splitting, adhesive transference and abrasive wearing.

锡青铜的主要磨损机制是疲劳脱层 、 粘着转移和磨料磨损.

Non-abrasive, hard concrete, cured concrete, reinforce concrete terrazzo.

适用于 非 研磨性材料, 硬混凝土, 老混凝土, 钢筋混凝土等.

Presently, there are many techniques and one among them is abrasive flow machining ( AFM ) process.

目前, 有很多技术,而其中之一是加工 ( AFM ) 过程的磨料流.

Dual cleaning action using a chemical and abrasive action formula.

通过化学和摩擦作用配方,提供双重清洁作用.

The abrasive grain is impregnated in nylon.

磨粒在尼龙中浸渍而成.

Abrasive grain up only 30 % weight; its self-sharpening action is weaker, resulting in lower grinding efficiency.

磨粒只占总重的30%; 其自锐性弱, 因而磨削效率很低.

Abrasive grain erosion is the basic wear form on the tapered liner in desilters and desanders.

磨粒侵蚀是除泥器和除砂器中锥套这一主要易损件产生磨损的基本形式.

Product ground by grinding material with abrasive belt of grit 320 # to produce continuous grinding lines.

用粒度适当粒度的砂带拉丝成连续的线条.

A special wide abrasive belt grinding facility is designed to be used in flat-part deburring belt.

设计了一种专用宽砂带磨削设备,用于平板类零件的去毛刺加工.

The synthetic technology and conditions of phenolic resin as adhesive of abrasive belt were discussed.

本文讨论了砂带用酚醛树脂粘合剂的合成工艺和条件.

There are two ways for the abrasive particle movement relative to material's surface: sliding and rolling.

磨料颗粒相对于材料表面的运动方向上主要可分解为两种运动方式, 即 滑动和滚动.

The adhesion , micro-hardness and abrasive resistance of the film were tested.

测定了其结合强度 、 显微硬度及耐磨性能.

The theory basis of abrasive powder analysis method and toll joint wear monitor method was introduced.

介绍了井口磨屑分析法和工具接头磨损检测法的理论依据.

Due to extremely slow speed, should select a very fine abrasive powder to extract the coffee.

由于速度极慢, 应选取研磨得极细的咖啡粉来萃取.

The paper studies the application of template matching to different abrasive image recognition.

论文分析研究了模板匹配方法在不同磨损图像识别中的应用.

The main wear mechanisms are oxidation wear, adhesive wear, and abrasive wear.

主要磨损机制为氧化磨损 、 粘着磨损和磨粒磨损.

In the same time, abrasive wear is the major failure reason in mining machines.

在矿山机械中,磨粒磨损(它包括冲蚀磨损 、 磨料磨损和微动磨损)是其磨损失效的主要原因.

The old lubricant should, therefore be cleaned off periodically to prevent abrasive wear.

为防止齿轮遭受磨损起见,应定期将旧复合剂加以清除.

If required, rub with fine abrasive paper or lightly blast with suitable grit all the surface to which adhesive will be applied.

如果需要，使用细砂纸打磨或用适当的砂粒轻度喷吹所有的拟敷胶表面。

Research on Treating Agent of Lucency Water-proof Abrasive Paper

新型透明耐水砂纸浸渍处理剂的研究