al的例句大全

Proposition afraid unworkable try submit al terminative.

所提方案恐不可行,请另提其他方案.

On the line broadening and shifts of al-laser produced plasma

Al激光等离子体的谱线展宽及线形研究

Initiation, propagation and termination of the polymerization of butadiene catalyzed by Fe ( naph)_2 Al ( I Bu)_3 Halides system have been investigated.

本文考察了Fe（naph）2-Al（i Bu）3卤化物体系催化丁二烯聚合的链引发、链增长和链终止反应。

Ring opening alternating copolymerization of phthalic anhydride and propylene oxide by nd ( naph) 3 al ( I bu) 3

Nd（naph）3-Al（i-Bu）3催化邻苯二甲酸酐与环氧丙烷交替共聚

Polymerization of butadiene with ni ( naph)_2 al ( I bu)_3 bf_3 · roh catalyst system

Ni（naph）2Al（i Bu）3BF3·ROH体系催化丁二烯聚合Ⅰ丁二烯的聚合行为

Study on Synthesis of cis 1,4 polybutadiene with ndcl_3 · tbp al ( I bu)_3catalyst system

NdCl3·TBP Al（i Bu）3催化体系合成高顺式聚丁二烯的研究

The main reduced product of Ni ( naoh) 2 by Al ( I Bu) 3 was Ni 0;

得出Ni（naph）2被Al（i－Bu）3还原的主要产物是Ni0；

The reaction of FeCl 3 and Al ( I Bu) 3 produces colloidal particles.

Al（i-Bu）3以缔合状态存在并解离成离子对，它与FeCl3作用是形成胶粒的主要反应；

Study on phase state of FeCl 3 al ( I bu) 3 phen catalyst system for Butadiene Polymerization

丁二烯聚合反应用FeCl3-Al（i-Bu）3-Phen催化剂体系相态的研究

A Study on the Notch Brittleness of Stress Rupture in Fe-Mn-Al-Cr Austenitic Heat-Resisting Steels

Fe-Mn-Al-Cr系奥氏体热强钢持久缺口脆性的研究

Effect of Lanthanum on Hot Brittleness of the Al& 4% Cu Alloy

稀土La对Al-4%Cu合金热脆性的影响

It is called Bride of the Sea ( Aarous al-Bahr), a local nickname for Tripoli.

这份报纸名为“大海的新娘”，这是的黎波里的呢称。

In visceral pain, its quality is obscure, its accurate position in body is unclear, the response of body is greatly intense, such as sudation, tachycardia, breathe hard et al.

内脏痛的性质模糊，定位不明确，机体的反应强烈，可引起出汗、心悸气短。

The paper deals with the existence of nontrivial solutions to a class of nonlinear Hammerstein eigenvalue problems using the cone theory and the topological approach. THE STUDIES OF HALF TOPOLOGICAL APPROACH ABOUT CLOSE BORON HYDRIDE ANION ET AL

运用锥理论和拓扑方法研究一类非线性Hammerstein本征值问题的非平凡解.闭式硼烷阴离子等的半拓扑图式研究

The brazing-ability and quality of brazed seam of 6063 aluminum alloy brazed by Al-Si eutectic filler metal and QF flux is discussed by means of test of spread-ability and test of T joint.

本文用平百铺展试验和T型接头试验，研究了6063铝合金采用AI－St钎料和氟化物钎剂（QF钎剂）钎焊时的钎焊性和钎缝质量。

The simulation mentioned above was confirmed by series experiments, and the proper thickness of the brazed seam is 50~ 80 μ m for the CRB joint of Al with Si as an interlayer.

在试验证明FEM计算结果的可靠性的基础上，给出了Si为中间层进行LF21铝合金接触反应钎焊时，其合适的钎缝宽度范围是50～80μm。

The morphological indexes include plant height, leaf area, the length of the main root, the quantity of the first branched root, the length of the longest branched root, the root volume and the dry weight of root and plant, et al.

测定的形态指标包括株高、叶面积、主根长度、侧根数、最长侧根长度、根系体积、根干重和地上部分干重等；

We studied the contribution of Lee et al. on bottom-up update strategy and developed it to be used on TPR-Tree to reduce I/ O and CPU Time.

本文研究和发展了Lee等人提出的自底向上更新机制，将其应用于TPR~树，提高了I/O及CPU效率。

It is shown that for devices of sintered Al electrode whether the boron diffusion can improve the drop characteristics mainly depends on the minority carrier life.

结果表明：对于烧铝电极器件浓硼扩散改善压降作用主要取决于能否提高器件的少子寿命；

The effects of parameters of hot pressing temperature, pressure, time and circumstance to mechanical properties of the B/ Al composites and boron fiber itself are analyzed.

从工艺的角度分析了复合工艺参数&温度、时间、压力和环境对B/Al复合材料及对B纤维的影响。