alloy的例句大全

In the paper, the operation technology of electron beam evaporation plating Aluminium Chromium alloy coating is studied The optimum technology is obtained by discussing the influence of votage, current on auter appearance, adhesion inner Stress.

本文研究了电子束蒸发镀铝铬合金涂层的制备工艺，通过讨论不同的电压、束流对膜层外观、结合力、内应力的影响，确定了合适的陈镀工艺；

Study on surface pretreatment of titanium alloy adherend

钛合金粘接件表面技术研究

Fiberglass-Reinforced Plastic ( FRP) made from Epoxy Vinyl Ester Resin will be compared to acid brick and rubber-lined carbon steel and high alloy clad carbon steel as well as resin coated carbon steel in corrosive flue gas applications.

本文比较了环氧乙烯基玻璃钢（FRP）与碳钢衬耐酸砖和衬橡胶、碳钢覆合高镍合金以及碳钢衬树脂胶泥在腐蚀性烟气方面的应用。

The running tests of the alloy coatings on the blade of hydraulic turbine produced using oxy-acetylene spray welding procedure manifested that the average service life of many different hydraulic turbine obtained a lot improvement after spray welding.

应用氧乙炔喷焊工艺在水轮机叶片上制备合金涂层，经过数台机组多年的实际运行，表明该材料抗磨蚀性能优异，喷焊后的水轮机叶片的平均使用寿命得到大幅度提高。

Irradiation Absorption Test of Hydrogen for Zr-2 Alloy in Chemical Decontamination Solution

Zr－2合金在化学去污液中的辐照吸氢试验

Tenacity and abrasively of high-intensity alloy steel body strengthened by balanced hardening treatment and stress removal.

高强度合金钢本体，经均衡之硬化处理及应力消除，强化本体韧性及耐磨性。

The micro-scale abrasive wear behaviors of TAMZ alloy were studied using a TE66 micro-scale abrasion tester.

采用TE66试验机对新型TAMZ钛合金的微磨粒磨损行为进行了研究。

In virtue of abraser and vibrating sample magnetometer, the effect of rare earth element cerium on wear volume, magnetic intensity, coercitive force and magnetic permeability of electroless Co-Ni-B alloy coating are studied.

借助磨损试验机和振动样品磁强计等研究了稀土金属Ce对化学镀Co-Ni-B合金镀层磨损体积、磁化强度、矫顽力和磁导率的影响。

Research of dynamics of surface oxidization of 4004 alloy at a constant temperature

4004铝合金表面恒温氧化动力学研究

Effect of Mg Segregation on Grain Boundary Binding Force and Fracture Stress in High-Strength Aluminium Alloy

高强铝合金Mg偏析对晶界结合力和断裂应力的影响

Research on the built-up weiding rod of the wear-resisting alloy with boronic compound hard phase

硼化物硬质相耐磨合金堆焊焊条的研究

The character of microstructure and micro rigidity of bond area of the ZA alloy in the TIG welding was investigated using TME, SME and other methods.

在异种钢焊接接头中，熔合区作为一个组织、结构、成分与母材和焊缝金属非常不同的过渡区，对接头的性能和使用寿命起着决定性作用。

The microstructural evolution of the alloy was investigated by optical microscopy and scanning electron microscopy.

利用光学显微镜和扫描电子显微镜分析合金在不同变形条件下的组织演化规律.

Research on Compressive Creep Behavior of the High Aluminum Zinc Based Alloy

高铝锌合金压蠕变行为研究

Shape-memory alloy compression staple for joint fractures

镍钛记忆合金接骨钉治疗关节骨折

Finite element analysis on thickness distribution of superplastic bulging of Al-Mg-Sc alloy semisphere part

半球形Al-Mg-Sc合金超塑胀形壁厚分布的有限元分析

Latter-stuffing installation of tongue and groove of doors and windows of aluminum alloy and plastic steel

铝合金及塑钢门窗企口后塞安装法

The fracture surface indicates that the mechanism of the superplastic deformation in AZ91 alloy is controlled by the grain boundary sliding accompanied with cavities interlinking.

大晶粒AZ91合金的超塑性变形机制是晶界滑移控制下的孔洞连接协调机制。

A mathematical model of axisymmetric compression of semi-solid alloy slurry was described.

描述了一种轴向挤压的 半固态 合金浆料的数学模型.

Door, drawer handles sand barrier-free selection of high quality aluminum alloy handle.

柜门, 抽屉拉手选用优质铝合金喷砂无障碍拉手.