alloy的例句大全

NFW material for ball mill lining& multielement Medium Cr alloy steel

球磨机衬板新材料&中铬多元合金钢

In this paper, the corrosion property of NZS system decorative copper alloy under different plastic deformations is investigated, and the influences of grain size and annealing temperature upon the corrosion property discussed.

着重研究了NZS系列装饰铜合金在不同塑性变形下的腐蚀性能。同时对晶粒度、退火温度对腐蚀性能的影响做了一定的探讨。

The friction behaviors of PA-6. PE and PA-6/ PE alloy have been tested by using MHK-500 and SRV wear experiment machines.

用MHK-500和SRV型磨损试验机测试了PA-6/PE合金的摩擦性能。

In an example embodiment, a method for adhering MSQ provides for a liner oxide on an aluminum alloy layer on a semiconductor substrate.

在实施例中，该方法保证把MSQ粘附在衬里氧化物在半导体基板上的铝合金层上。

Research on Viscous Pressure Forming ( VPF) of Aluminum Alloy Ladder Parts

铝合金阶梯形件粘性介质压力成形的研究

Metal-based alloy gravity die casting plant and the research design

金属型铝合金重力浇注装置及其模具设计的研究

Gravity Die Casting Process for Aluminium Alloy Driven Belt Wheel

摩托车铝合金驱动板的金属型铸造工艺

The microstructure and tensile/ impact properties of a new type metastable beta titanium alloy ( insert composition here, Ti-B20) under different heat treatment conditions were studied.

研究了1种新型的亚稳定钛合金（Ti-B20）在不同热处理制度下的显微组织与拉伸和冲击性能。

The design of bi-hard alloy products of one pair of awls from that is moulded

带倒锥硬质合金制品自压模的设计

Directional Solidification of Zn 2.75% Cu Alloy and the Effect of ACRT Forced Convection

Zn-2.75%Cu合金定向凝固组织及对流的影响

The Application Of AAAC in the Project Development and study of all aluminum alloy conductor with high strength and heat-resistance

高强耐热全铝合金导线的研究与开发高强度全铝合金导线在输电线路中的应用

Because of its large tensile strength, light weight, corrosion resistance, good sagging performance, all aluminum-alloy conductor ( AAAC) are widely used in many countries.

铝合金导线（AAAC）具有抗拉强度大、重量轻、耐腐蚀、弧垂性能好等优点，在很多国家被广泛采用。

Based on development need of overhead conductors, the study of all aluminum alloy conductor ( AAAC) with high strength and heat-resistance, including melting, rolling, pulling, and middle-treatment process, was explained in detail.

针对架空导线的发展需要，从铝合金导线的熔炼、轧制、拉制及中间处理等方面，分析了高强耐热全铝合金导线的研究与开发。

Surface rolling strengthening of Mg alloy ZML

ZMl Mg合金的表面滚压强化

E pure carbon as the standard sample and helped by the ZAF correction method, it is also applicable to the carbon content analysis of the carbide phases in high alloy steel.

用纯碳作标样，再以ZAF法修正计算，可用于高合金钢的碳化物相的碳量分析。

Being etched with acid apueous solution, this alloy can be activated and hydrogenized easily, and yts kinetics is improved.

酸性水溶液浸蚀时该合金易活化和氢化，且改善了它的动力学特性。

Microstructures of AZ80+ xSr Alloy and Existing forms of Sr

AZ80+xSr合金的组织和Sr的存在状态

And produce copper alloy castings for forging press , mining, power generation, and ship building equipment etc.

还可为锻压 、 矿山 、 发电 、 船舶等设备配套.

The same result was achieved when some TaC was added into WCo alloy.

当在钨钴合金中加入TaC时，同样得到了这种棱角圆滑的组织结构。

A layer of ceramic film can be grown on Ti alloy by the micro plasma oxidation.

在钛合金表面用微等离子体氧化能产生一层陶瓷膜.