analyzed的例句大全

Some bottlenecks of network communication are shown in SCADA-GIS, the requirement of network performance varying from service to service in SCADA-GIS is analyzed.

针对SCADA GIS系统网络通讯中的瓶颈，分析了该系统中各种服务对网络性能的要求。

The key elements of parallel system such as topological structure of DSP arrays, internetwork and parallel task sharing methods are analyzed, and then their correlations are discussed.

研究了并行处理系统结构，分析了DSP阵列的拓扑结构、互连网络、并行任务分配方法等组成并行系统的要素，并探讨了它们之间的相互关系。

The characteristics of dyeing fastness of natural plant dyeing are analyzed.

分析了植物染料染色牢度的特点。

Numerical off-line simulation is carried out at different starting up conditions ( engine engaging speed, load torque and clutch LQR control parameters). The results are investigated and analyzed.

在不同的起步条件下（发动机起步转速、负载以及离合器LQR控制参数）对该模型进行了离线仿真分析，并与闭环控制策略的起步性能进行比较。

The commutating and wearing character of the traction machine brush during moving were analyzed.

对牵引电机用电刷在牵引电机运行过程中的整流性能和磨损性能进行了分析。

A gale hit the 6th agricultural division on August 22, 2005.Based on several materials such as surface, high altitude and radar data, this paper analyzed and summarized the gale weather process, then got some conclusions that will be referred to gale forecast and warning.

利用地面、高空及云图、雷达资料对2005年8月22日晚一场袭击农六师各地的大风天气过程进行了分析总结，并得出一些对临近预报有意义的结论。

Analyzed forming process of the reverse-gear shifting fork used in automobile, designed a progressive die, introduced die structure, hoped it has a certain reference to the similar parts die design.

分析了汽车零件倒档拨叉零件成形工艺，设计出了一幅级进模，并介绍了该模具结构，希望对类似零件的模具设计有一定的参考作用。

Doppler frequency shifting and curve fitting differential methods for measuring velocity are analyzed and compared.

对测量速度的两种方法，多普勒频移法和曲线拟合微分法作了分析和比较；

Stuctural properties for optimal value function are analyzed. Next, we study the limited inventory pricing problem for perishable products with unstructured model uncertainty.

接下来本文研究了非结构化模型不确定下，如何对有库存约束的易逝品制定鲁棒价格策略的问题。

Through experiments and FEM of ANSYS/ LS_DYNA program, the deforming mode for free electromagnetic forming and modeled forming of sheet metals are analyzed.

通过实验及ANSYS/LS DYNA程序的有限元模拟，对平板件的电磁自由成型及有模成型的变形模式进行了研究。

The compound and pore structure of formed coke were also analyzed.

此外，分析了型焦的组成和孔孢结构。

Also basicity factor, quality coefficient, activity coefficient, hydraulic coefficient and radiation of slag were analyzed according to the Chinese national standard documents.

依照国标文件对矿渣的碱性系数、质量系数、活性系数、水硬系数及放射性进行了分析。

Distinct causes of formation for different graded bedding in debris flow deposits have been analyzed using the ratio of flow plug.

应用层理结构的分类指标&流核比，对泥石流堆积层理的正粒序、反粒序和混杂粒序等进行成因差异分析。

The mechanical fault of some large motor bearings are detected and analyzed, the corresponding improvement is proposed.

通过对某大型电动机轴承的故障检测及分析，提出了相应改进措施。

Tonka beans were treated in high-voltage static field, extracted with 95% ethanol for 120 hours,( filtrated,) concentrated, dried by anhydrous sodium sulphate, and then analyzed by GC/ MS.

先用高压静电场对黑香豆进行预处理，然后用95%的乙醇将预处理的黑香豆浸泡120h，过滤，用旋转蒸发仪浓缩，用无水硫酸钠干燥后进行GC/MS分析。

Has analyzed the school edition and the home education importance and limited as well as the freshman class development school cooperation significance.

分析了学校教育与家庭教育的重要性与局限性以及一年级开展家校合作的意义。

With the restraint of flange to web considered, the buckling stress of steel beam web under different stress is analyzed. The condition for instating web stiffener is given.

考虑翼缘对腹板的约束作用分析处于不同状态下钢梁腹板的临界应力，得出腹板加劲肋的设置条件激励与约束的关系；

In this paper the voltage features are analyzed of the Laser Power Sources Mains Control System and its exterior device. It is suggested to isolate the both and a typical application circuit is designed.

分析了激光电源控制系统与控制外设的电平特点，介绍了控制系统与控制外设隔离方法，设计了典型应用电路；

Chemical constitution and microscopic pattern of the inorganic filler in a corona resistant magnetic wire insulating coating was tested and analyzed.

测试和分析了某型耐电晕电磁线绝缘漆中无机填料的化学组成和微观形貌，并测试该电磁线绝缘漆的紫外可见光吸收谱。

After high pressure jet and wash, cement grouting, the bedding fault zone in layer C5 and fractured fault zone were tested, checked and analyzed by supersonic wave.

C5层间错动带、断层破碎带经高压喷射冲洗水泥灌浆后，应用超声波测试检查和分析。