angular的例句大全

It has been successfully used in measuring angular displacement within paddle of racing boat.

将其用于赛艇角位移测量,收到较好的效果.

In other words, describing an orientation is mathematically equivalent to describing an angular displacement.

换句话说, 在数学上描述方位就等价于描述角位移.

This paper puts forward a way of directly measuring angular acceleration by a hardware.

提出了一种用硬件直接测量角加速度的方法.

The process of the correcting angular deviation has been analyzed by using the dynamic model.

应用动力学模型分析了球面滑动轴承的纠偏过程,给出了数值算例.

That is, the angular velocity is more than doubled.

即所得的末角速度大于原来的二倍.

The rotating beam with a varying angular velocity undergoes a verticalexcitation and a horizontal excitation.

利用哈密顿原理建立了支承运动情况下变速旋转梁的弹性振动方程及边界条件.

However, the system can keep stable in any rotating angular velocity in the coupling dynamical model.

而耦合动力学模型在转动角速度为高速时, 系统都是稳定的,这与实际情形相符.

And the angular velocity equations are deducted on the condition of different accelerometer allocation scheme.

对应不同的加速度计配置方式,推导出了角速度的解算方程.

Effect of change of mean angular velocity of the crank on stability of SCWC was analyzed.

其后,分析了爬楼梯轮椅曲柄平均角速度的改变对其稳定性的影响.

A TeO_2 acousto-optic tunable filter ( AOTF) with large angular apert-ure is described.

本文描述了用TeO2晶体制作的大角孔径声光可调滤光器（AOTF）。

Now, if you compute the curl of this guy, you will get zero, zero, two, two k.And so k is the axis of rotation, two is twice the angular velocity.

现在，如果你去计算它的旋度的话，得到，也就是2k，k是旋转轴，2是角速度的两倍。

Concretely, this curl gives you the angular velocity of the rotation, well, with a factor two but that doesn't matter, and the axis of rotation, the direction of the axis of rotation.

它给出了这个旋转的角速率，有一个因子2，但没关系，给出了旋转轴，和旋转轴的方向。

A theoretical analysis of angular deformation and local stresses in spherical vessels

球形容器角变形及其局部应力的一个理论分析

Measuring of angular deformation degree of container welding seam

容器焊缝角变形度检测

Approaching on Welding Angular Deformation Control of Spherical Storage Tank

球形储罐焊接角变形的控制

Presents model for angular deformation of longitudinal weld.

提出压力容器简体纵焊缝产生角变形的模型。

Analysis of weld angular deformation of lapped joints and T-shape joints

搭接接头与T型接头焊接角变形的分析

To decide these heating parameters, the relation between heating parameters and angular deformation must be clarified.

为了确定工艺参数，必须探索加热条件和角变形之间的关系。

Study on Stress Concentration Resulted from Angular Deformation and Welding Butt Joints on Spherical Tanks ( I)

球罐焊缝错边及角变形引起应力集中的研究（Ⅱ）

Generalized Spline Subdomain Endochronic Elastoplastic Analysis for Cylindrical Shell with Alternate Side and Angular Deformation

具有错边、角变形圆柱壳广义样条子域内时弹塑性分析