anode的例句大全

The Changing World of Anode Raw Materials : Can Today's Carbon Technology Cope with it?

现代阳极工业制造技术能否适应世界原料的变化趋势?

The high-performance deep-well anode bed is the trend of future development.

可更换、高性能深井阳极的开发,是今后的发展方向.

An absorption method for the determination of trace silver and gold in lead anode slime.

阐述了铅阳极泥回收金银后的高铋渣料直接法生产锑白的新工艺.

The development of high capacity silicon-containing anode material in lithium-ion batteries was discussed in this paper.

锂离子蓄电池用高容量负极材料普遍存在首次不可逆容量高、循环性能差等问题.

The preparation of a novel natural graphite anode material coated with iron hydroxide has been studied.

合成并研究了一种包覆一层氢氧化铁的天然石墨材料,它可作为一种新型锂离子电池负极材料.

The effect of indium on the dissolution of aluminium sacrificial anode was studied.

研究了铟对铝基牺牲阳极溶解的影响.

It is proposed that In-rich segregated phase particles activate the dissolution process of aluminium sacrificial anode.

提出了偏析的富铟相使铝阳极活化而溶解的假说.

The tested results have guidance significance for the industrial application anode mud by water jet.

试验结果对工业应用具有指导意义.

The method is to add a baffle in the cooling channel, which is apeak the X-Z surface, located in the half of the anode surface and the clearance against the out side is 2 mm.

其具体的形式为在冷却通道中加一挡板，挡板垂直于X-Z平面，位于阳极的平分面上，挡板与外壁面的间隙为2厘米。

The anode corrosion rate by electrolytic polarization is dependent on the condition of test.

电解极化条件下的腐蚀结果与不同的试验条件相关。

ANALYSIS ON PRACTICABILITY APPLICATION OF SUBSTITUTING BOSHI PERMOMETER FOR BLAINE DETERMINATOR IN PRODUCTION OF PRE-BAKED ANODE Evaluation of Uncertainty in Measurement of Error for Length Measuring Instrument

勃氏透气仪替代Blaine值测定仪在预焙阳极生产中应用可行性分析测长仪示值误差测量结果不确定度评定

A Study of Metal Borides as High Capacity Anode Materials for Aqueous Primary Batteries

过渡金属二硼化物作为高容量负极的研究

Improvement of Electrochemical Process on the Performance of Π-conjugated Polymer Anode

电化学处理对∏共轭聚合物阳极特性的改善

The practice proves that the three key points i.e. anode solubility, ability to prevent chemical replacement and covering power for the new process can meet the demand of continuous production in batches. Cyanide strike copper plating process can be replaced by the new process completely.

实践证明，该工艺在阳极溶解性、防化学置换及深镀能力这3个关键环节上达到大批量连续化生产的要求，完全可取代氰化预镀铜工艺。

Discussing the problems in operation of large pre-baked anode cell in China

我国大型槽管理中的几个问题

Design of Lifting Mechanism for High-ampere Pre-baked Anode Cell

大型预焙槽阳极提升机构设计

Practices of controling trace elements in pre-baked anode

预焙阳极中微量元素的控制与生产实践

Practices of prolonging the service life of 135 kA pre-baked anode reduction cell

135kA预焙阳极电解槽延长槽寿命的生产实践

Improving baked anode quality.

改进阳极焙烧质量。

The electrostatic precipitation electrostatic agglomeration process is used for purifying the harmful gas and smoke dust from an aluminum cell of self baked anode.

应用电除尘与静电凝聚技术相结合，净化自焙阳极铝电解槽生产过程中所产生的有害气体和烟尘。